iCommand Manual

CAP-836
2.6
Calling up information
Fig. 5: Information menu
iCommand
15
Calling up information
It is possible to display various information about operating states and
parameter values on the display. In order to switch between the
information and the parameter displays, it is only necessary to press the
key. The Information menu with parameter n
umber and the
parameter value then appears on the display.
1 Menu item (code level)
2 Parameter number
3
Value range
1.
Press .

The next parameter value is shown
on the display.
In the i
nformation menu, the parameter Switch
pressure
is always shown as the first value.
After approx. 5 seconds without pressing the
the display switches back to the basic display.
iCommand
- Basic
It is possible to display various information about operating states and
parameter values on the display. In order to switch between the
information and the parameter displays, it is only necessary to press the
umber and the
on the display.
nformation menu, the parameter Switch
-on
is always shown as the first value.
After approx. 5 seconds without pressing the
key,
the display switches back to the basic display.