iCommand Manual

CAP-836
2.7.3
Inputting a code
2.7.4
Overview of submenus
Submenu for selection parameters
(operating mode example)
Fig. 7: Selection parameter submenu
iCommand
18
Inputting a code
Prerequisite: the code input menu has been called up.
1.
Set the desired code with the keys.
2.
To confirm the selected code, press .

The submenu for the selected code appears on the display.
For some codes, several parameters can be input one
after another. By pressing the
key, the next
parameter is selected automatically in such cases.
Overview of submenus
The submenus for
setting the parameters are similar in their structure.
Generally, it is possible to distinguish two types:
Submenu for selection parameters
The submenu for selection
parameters appears for all codes for which
there is an opportunity to select between different, specified setting
values. For the setting of the operating mode, e.g., it is possible to
select from among three specified values/operating modes.
1 Menu item (code level)
2 Parameter number
3
Value range
iCommand
- Basic
Prerequisite: the code input menu has been called up.
The submenu for the selected code appears on the display.
For some codes, several parameters can be input one
key, the next
parameter is selected automatically in such cases.
setting the parameters are similar in their structure.
parameters appears for all codes for which
there is an opportunity to select between different, specified setting
values. For the setting of the operating mode, e.g., it is possible to
select from among three specified values/operating modes.