iCommand Manual

CAP-836
2.7.6
Switch automatic restart on/off: Code 0003
iCommand
21
Switch automatic restart on/off: Code 0003
By
inputting the code 0003, the automatic restart can be switched
on/off after a power failure.
1.
Press and hold for three seconds.

The code input menu appears on the display.
2.
Press .

A 1 appears on the display.
3.
Press .
4.
Set the code 0003 with the keys.
5.
To confirm the selected code, press .

The submenu for switching the automatic restart on/off
appears on the display.
6.
There are two values from which to choose:
- 0: Automatic restart OFF
- 1: Automatic restart ON
Set the desired value with the keys.
7.
To confirm the selected value, press .

The set value is saved and the code input menu appears on
the display again.
8.
Press
again to go back to the basic display.
iCommand
- Basic
inputting the code 0003, the automatic restart can be switched
The code input menu appears on the display.
The submenu for switching the automatic restart on/off
There are two values from which to choose:
The set value is saved and the code input menu appears on
again to go back to the basic display.