iCommand Manual

CAP-836
2.7.7 Set on-
site operation/remote operation: Code 0008
iCommand
23
site operation/remote operation: Code 0008
By inputting the code 0008, it is possible to
switch between on
operation and remote operation.
1.
Press and hold for three seconds.

The code input menu appears on the display.
2.
Press .

A 1 appears on the display.
3.
Press .
4.
Set the code 0008 with the keys.
5.
To confirm the selected code, press .

The on-
site operation/remote control submenu appears on the
display.
6.
There are three values from which to choose:
- 0: On-site operation
- 1: Remote control
- 2: BLS-OK
Set the desired value with the keys.
7.
To confirm the selected value, press .

The set value is saved and the code
input menu appears on
the display again.
8.
Press
again to go back to the basic display.
iCommand
- Basic
site operation/remote operation: Code 0008
switch between on
-site
The code input menu appears on the display.
site operation/remote control submenu appears on the
There are three values from which to choose:
input menu appears on
again to go back to the basic display.