iCommand Manual

CAP-836
2.7.9
Switch Basic load switching mode on/off: Code 0018
iCommand
26
Switch Basic load switching mode on/off: Code 0018
By inputting the code 0018, the Basic load switching mode can be
switched on/off.
1.
Press and hold for three seconds.

The code input menu appears on the display.
2.
Press .

A 1 appears on the display.
3.
Press .
4.
Set the code 0018 with the keys.
5.
To confirm the selected code, press .

The Basic load switching mode submenu
display.
6.
There are two values from which to choose:
-
0: Basic load switching mode is switched off
-
1: Basic load switching mode is switched on
Set the desired value with the keys.
7.
To confirm the selected value, press .

The set value is saved and the code input menu appears on
the display again.
8.
Press
again to go back to the basic display.
iCommand
- Basic
Switch Basic load switching mode on/off: Code 0018
By inputting the code 0018, the Basic load switching mode can be
The code input menu appears on the display.
The Basic load switching mode submenu
appears on the
There are two values from which to choose:
0: Basic load switching mode is switched off
1: Basic load switching mode is switched on
The set value is saved and the code input menu appears on
again to go back to the basic display.