iCommand Manual

CAP-836
2.8.3
Acknowledging fault and warning messages
Acknowledging a fault message
Acknowledging a warning message
iCommand
34
If a fault not listed in the warning table occurs, contact
the manufacturer immediately.
Acknowledging fault and warning messages
NOTICE!
Danger of property damage
due to improperly
performed fault remedy/maintenance work!
Acknowledgement of fault and warning messages
without properly-
executed fault remedy/maintenance
work can cause severe damage to the compressor on
through to total failure.
- Only have fault remedy
/maintenance work performed
by qualified personnel.
-
Only acknowledge fault and warning messages if fault
remedy/maintenance work has been performed
properly.
1.
Press .

The fault message on the display goes out.
Acknowledging a warning message
1.
Press .

The
fault message on the display goes out.
iCommand
- Basic
If a fault not listed in the warning table occurs, contact
due to improperly
performed fault remedy/maintenance work!
Acknowledgement of fault and warning messages
executed fault remedy/maintenance
work can cause severe damage to the compressor on
/maintenance work performed
Only acknowledge fault and warning messages if fault
remedy/maintenance work has been performed
The fault message on the display goes out.
fault message on the display goes out.