iCommand Manual

CAP-836
1.4.2
Description of the installed
safety devices
Emergency stop button
Fig. 2: Emergency stop button
By pressing the
emergency stop button
machine is stopped by an immediate switching off of
the power supply. After an
emergency stop button
has been pressed, it must be u
nlocked by turning it
so that switching on is possible.
WARNING!
Danger to life
from an unauthorized
restart!
An uncontrolled restart of the machine
may cause serious injuries including
death.
-
Before switching the machine back
on, make sure the cause of the
emergency stop has been removed
and all safety devices have been
installed
and function properly.
-
Do not unlock the EMERGENCY
STOP button until there is no more
danger.
Relief valves
Relief valves a
re unburdening equipment for
under pressure such as boilers
, pressure
and pipes. In case of an im
permissible pressure
increase, relief
valves bleed off gases, vapors
liquids into the atmosphere.
8
Description of the installed
emergency stop button
, the
machine is stopped by an immediate switching off of
emergency stop button
nlocked by turning it
from an unauthorized
An uncontrolled restart of the machine
may cause serious injuries including
Before switching the machine back
on, make sure the cause of the
emergency stop has been removed
and all safety devices have been
and function properly.
Do not unlock the EMERGENCY
-
STOP button until there is no more
re unburdening equipment for
areas
, pressure
vessels
permissible pressure
valves bleed off gases, vapors
or
Do not change the pressure setting of the
pressure relief valve, restrict the function of the
relief valve or replace the relief valve with a
plug.
1.5
Environmental protection
NOTICE!
Danger to the environment from
incorrect handling of pollutants!
Incorrect handling of pollutants,
particularly incorrect waste disposal,
may cause serious damage to the
environment.
-
Always observe the instructions
below regarding handling and
disposal of pollutants.
-
Take the appropriate actions
immediately if pollutants escape
accidentally into the environment. If
in doubt, inform the responsible
municipal authorities about the
damage and ask about the
appropriate
actions to be taken.
The following chemical
s are used:
Oil
Oils can contain substances that are harmful to the
environment. They must not be allowed to escape
into the environment. Catch replaced oils in suitable
containers and dispose of in accordance with
applicable
local, state and federal regulations
Lubricants
Lubricants such as greases and oils
harmful
substances. They must not be allowed to
escape into the environment.
in accordance with applicable
federal regulations.
Safety
Do not change the pressure setting of the
pressure relief valve, restrict the function of the
relief valve or replace the relief valve with a
Environmental protection
Danger to the environment from
incorrect handling of pollutants!
Incorrect handling of pollutants,
particularly incorrect waste disposal,
may cause serious damage to the
Always observe the instructions
below regarding handling and
disposal of pollutants.
Take the appropriate actions
immediately if pollutants escape
accidentally into the environment. If
in doubt, inform the responsible
municipal authorities about the
damage and ask about the
actions to be taken.
s are used:
Oils can contain substances that are harmful to the
environment. They must not be allowed to escape
into the environment. Catch replaced oils in suitable
containers and dispose of in accordance with
local, state and federal regulations
Lubricants such as greases and oils
can contain
substances. They must not be allowed to
Dispose of lubricants
in accordance with applicable
local, state and