Product Manual

Installation and commissioning
CAP-834
24
5 Installation and
commissioning
5.1 Safety instructions for the
installation and commissioning
Electrical system
DANGER!
Danger to life from electric power!
Contact with live parts may prove fatal.
When switched on, electric
components can be subject to
uncontrolled movements and may
cause grave injury or death.
- Switch off the power supply before
starting work and make sure that it
cannot be switched on again.
Follow lockout/ tagout procedure.
Improper initial commissioning
WARNING!
Danger of injury due to improper
initial commissioning!
Improper initial commissioning can
result in serious injury and significant
damage to property.
- Before the initial commissioning,
ensure that all installation work has
been carried out and completed in
accordance with the information and
instructions in this manual, National
Electric Code and local, state and
federal regulations.
Securing to prevent restart
WARNING!
Danger to life from an unauthorized
restart!
In the event of an unauthorized restart
of the power supply during installation,
there is a danger of serious injuries or
death for persons in the danger zone.
- Switch off all power supplies before
starting work and make sure they
cannot be switched on again.
Follow lockout/ tagout procedure.
Improper installation and commissioning
WARNING!
Risk of injury due to improper
installation or commissioning!
Improperly performed installation and
commissioning may lead to serious
injury and significant material damage.
- Provide for sufficient mounting
clearance before starting to work.
- Use caution when handling exposed
components with sharp edges.
- Keep the assembly area tidy and
clean! Loose components and tools
lying around or on top of each other
may lead to accidents.
- Mount all components properly.
Tighten all screws to the prescribed
torque.
- Secure components to prevent them
from falling down or tipping over.
- Observe the following prior to
commissioning:
- make sure that all installation
work has been performed and
completed following the
instructions and information
provided in this manual.
- make sure that no persons are
still in the danger zone of the
machine.