Product Manual

Maintenance
CAP-834
42
Fig. 38: Unfastening the air/oil separator
4.
Use the strap wrench (Fig. 38/2) to unfasten and
remove the air/oil separator (Fig. 38/1).
5.
Remove old gasket remains from the air/oil sep-
arator.
6.
Moisten the new gasket with a little oil.
Fig. 39: Air/oil separator
7.
Screw in the new air/oil separator (Fig. 39/1) up
to the stop.
8.
Tighten the new air/oil separator (Fig. 39/1) half
a turn by hand.
7.4.10 Replacing the intake filter
Standard intake filter
1.
Close the shut-off valve on the pressure network
side and secure it to prevent it from being
opened again.
2.
Open and remove the enclosure panels with the
special wrench.
Fig. 40: Unfastening the clamp on the intake filter
3.
Unscrew and remove the cover from the intake
filter (Fig. 40/1).
4.
Remove the old filter element.
5.
Insert the new filter element.
6.
Screw the cover back on the intake filter
(Fig. 40/1).
7.
Unfasten the intake filter (Fig. 40/1).