Product Manual

Faults
CAP-834 45
during all work hear hot surfaces.
- Before all work, make sure that all
surfaces have cooled off to the
ambient temperature, wait at least
30 minutes.
Compressed air
WARNING!
Danger of injury from compressed
air!
Compressed air can escape from
compressed air hoses or components
under pressure in case of improper
handling or in case of a fault. It can
injure eyes, whip up dust or cause
uncontrolled movements of hoses.
Components under pressure can move
in uncontrolled fashion with improper
handling and cause injuries.
- Before removing hoses or
components under pressure, make
sure the pressure is relieved.
- Have faulty components that are
under pressure during operation
replaced by appropriate specialist
personnel immediately.
- Before all work, make sure that the
compressor is not under pressure;
wait at least 5 minutes.
Oil vapor
CAUTION!
Danger of injury from oil vapor!
In case of high temperatures oil vapor
can form. Oil vapor can irritate eyes
and the respiratory system.
- When working on the oil system and
if an oil vapor arises, wear breathing
protection and protective goggles
and ensure that there is a fresh air
supply.
Behavior in the event of faults
The following applies in principle:
1.
Immediately initiate an emergency stop in the
event of faults posing an immediate danger to
people or property.
2.
Ascertain the cause of the fault.
3.
If fault rectification requires work in the danger
zone, shut down the machine and secure to
prevent restarting.
Immediately notify those responsible at the
place of use about the fault.
4.
Depending on the nature of the fault, have it
rectified by authorized specialized personnel or
rectify it yourself.
8.2 Fault displays
Refer to the  controller documentation for infor-
mation on fault displays.