Spec Sheet

UPDATED: November 7, 2012
MATERIAL SAFETY DATA SHEET
Supplier:
FS-Curtis
1905 Kienlen Ave., Saint Louis, MO 63133
EMERGENCY TELEPHONE NUMBER: 1-(800)-798-6457
****************** I. PRODUCT IDENTIFICATION ******************
Product Name: FSC-1000 Compressor Lubricant
Chemical Name: Lubricating Oil
Chemical Family: Petroleum Hydrocarbon
********* II. TYPICAL CHEMICAL AND PHYSICAL PROPERTIES *********
Vapor Pressure (MM HG): Nil Vapor Density (Air=1) Nil
Solubility (in water): Nil Melting Point: NA
Specific Gravity (H2O=1): .86 - .94
Boiling Point F(C): Greater than 680F (360C)
Evaporation Rate: Slower than n-Butyl Acetate
Appearance and Odor Amber Liquid, Slight Hydrocarbon Odor
***************** III. HAZARDOUS COMPONENTS *********************
COMPONENT CAS Wt - % ACGIH TLV OSHA PEL STEL
Highly Refined Petroleum Oil 64742-65-0 80-95 5 mg/M
3
5 mg/M
3
10 mg/M
3
Zinc dialkyldithiophosphate 25103-54-2 0.10 1.50 No limits established
************* IV. FIRE AND EXPLOSION HAZARD DATA **************
Flammability Class: NFPA 704=1 NFPA 30=III-B Combustible
Flash Point F (C) 370F(188C) - 455F (235C) (COC) LEL: n/av
EXTINGUISHING MEDIA:
According to the NFPA guide, use water fog. Foam. Dry chemical or CO
2
. Do not use a direct stream of water.
Product will float and can be reignited on the surface of water. Use water to cool containers
SPECIAL FIRE FIGHTING PROCEDURES AND PRECAUTIONS:
Material will not burn unless preheated. Do not enter confined fire-space without proper protective equipment
including a positive-pressure NIOSH approved self-contained breathing apparatus. Use water to keep fire exposed
containers cool.
********************** V. REACTIVITY DATA *********************
Stability (thermal, light, etc.): Stable
Hazardous polymerization: will not occur
Incompatability (materials to avoid): strong oxidizers
Conditions to avoid: extreme heat
Hazardous decomposition products: carbon monoxide

Summary of content (3 pages)