Instructions / Assembly

Step 10
Propane Gas Hook Up
A. Open the front door and install a standard 20lb LP cylinder (Type 1) into the opening
of the grill base (Note: the tank must be hanging from the tank hook) and connect the
LP gas hose with regulator assembly to the LP cylinder.
B. Connect the regulator to the propane tank. Proper procedures for gas leakage testing
must be obeyed. Please note the Gas Hook-Up, Danger, and Warnings pages for more
information.
The LP-gas cylinder valve connection device must properly and safely mate with the
connection device attached to the inlet of the (supplied) pressure regulator.
Always keep cylinder in upright orientation to provide vapor withdrawal!
Note:
The outdoor cooking gas appliance and its individual shutoff must be disconnected from the gas supply
piping system during any pressure testing of that system at test pressures in excess of 0.5 psi (3.5kPa).
The outdoor cooking gas appliance must be isolated from the gas piping system by closing its individual
manual shutoff during any pressure testing of the gas piping system at test pressures equal to or less than
0.5 psi(3.5kPa).