Wardrobe Version:10/11/2022 1/20
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 35 7 x 35 mm Fx5 B x 35 15 x 9 mm I(DL )x 3 Cx4 4 x 35 mm I(DR) x 3 D x 24 E x 10 6 x30 mm 4 x 10 mm Gx1 H x 15 4 x 30 mm I(CR) x 3 I(CL) x 3 Jx2 Kx2 4 x 40 mm Mx2 N x 8 (BLACK) Ox4 4 x 12 mm 6 x 30 mm P x 28 4 x 14 mm S x 8 (BLACK) 3 x 16 mm 3/20 Lx2 R x 24 3 x 12 mm
1 2 6 7 6 7 13 6 4 13 3 10 8 14 9 8 11 5 12 17 18 20 15 16 19 4/20 x3
Gx1 Ax4 1 Kx2 Mx2 4 x 12 mm 6 x 35 mm Fix part(K) to No.1 plate using screw(M) as shown. Px4 4 x 14 mm M K M 1 K M K P A P A P P A A G A 1 Flip the plate, insert quickfit screw(A) into corresponding holes with a screwdriver. P P G Fix clothing rod(G) to No.1 plate with screw(P) as shown.
2 Fx2 Ex4 Ax4 6 x 35 mm Ox4 Px8 4 x 10 mm P 4 x 14 mm Fix hinge(O) to No.13 plate with screw(P) as shown. P O P P O PP O E 13 Fix handle(F) with screw(E) as shown. E F x2 E E F A A A A A Insert quickfit screw(A) into corresponding holes in No.10 plate with a screwdriver.
Fx3 A x 19 3 Ex6 6 x 35 mm 4 x 10 mm A A A A 4 2 Insert quickfit screw(A) into corresponding holes in No.2, No.4 and No.15 plate with a screwdriver. A A A Fix handle(F) to No.15 plate with screw(E) as shown.
4 I(CL) x 3 I(CR) x 3 R x 12 Ax8 6 x 35 mm 3 x 12 mm R R R R A R 3 x 12 mm 3 x 14 mm CR A CR 3 CR A A A R CR T Insert quickfit screw(A) into corresponding holes in No.3 and No.5 plate with a screwdriver. R A R R I R R R A R A R CL A CL CL 5 R Fix slide rail(CL) and (CR) to No.5 and No.3 plate respectively with screw(R) as shown.
5 Dx2 Bx2 15 x 9 mm 6 x 30 mm B 7 7 D 2 B B 180° 7 D D Connect No.7 plate with No.2 using wooden dowel(D) and turn cam lock(B) in No.7 plate clockwise to tighten as shown. 6 6 7 7 Slide No.6 plate into grooves as shown.
7 Bx2 Dx2 15 x 9 mm 6 x 30 mm B 7 4 180° DB D 6 B 7 D Connect No.4 plate with No.7 using wooden dowel(D) and turn cam lock(B) in No.7 plate clockwise to tighten as shown. 8 6 7 7 6 Slide No.6 plate into grooves as shown.
Cx4 9 Dx4 6 x 30 mm 4 x 35 mm Attach No.10 plate to No.2 and No.4 using wooden dowel(D) and fix with screw(C) as shown. 2 D D 4 D 4 C 10 D C C 10 C C Bx4 10 Dx4 15 x 9 mm 1 D D 6 x 30 mm D B B B D B 2 D 4 180° B Cover No.1 plate to No.2 and No.4 using wooden dowel(D) and turn cam lock(B) in No.2,4 plate clockwise to tighten as shown.
Dx4 Bx4 11 15 x 9 mm B D 6 x 30 mm 11 9 B 180° 14 B 12 D B D D B D 5 Connect No.9,No.11,No.12 and No.14 plate with No.5 using wooden dowel(D) and turn cam lock(B) clockwise to tighten as shown. 12 8 11 9 Slide No.8 plate into grooves between No.9 and No.11 plate as shown.
Bx4 Dx4 15 x 9 mm B 6 x 30 mm D 11 D B D 3 180° B D 9 B D 14 Attach No.3 plate to No.9,No.11,No.12 and No.14 using wooden dowel(D) and turn cam lock(B) clockwise to tighten as shown. 14 3 8 5 Slide No.8 plate into grooves as shown.
15 Bx4 15 x 9 mm Dx4 6 x 30 mm Connect the two components using wooden dowel(D), and then turn cam lock(B) clockwise to tighten as shown.
16 P x 16 4 x 14 mm P PPP 13 13 P PPP o P P Attach No.13 door plate to the upper cabinet by fixing hinge with screw(P) as shown.
17 If there is misalignment after you install, adjust the screw to the best condition 16/20
18 B x 15 15 x 9 mm 17 19 B 180° B 16 B B B B B 15 x3 Attach No.16, No.17 and No.19 plate to No.15, then turn cam lock(B) clockwist to tighten as shown. 19 20 17 16 x3 Slide No.20 plate into grooves at first.
20 H x 15 4 x 30 mm Attach No.18 to No.16,17,19 plate, fix using screw(H) H H 18 17 H H H H 16 x3 21 R x 12 I(DL) x 3 I(DR) x 3 3 x 12 mm Fix runner (DL) and (DR) to No.16 and No.17 plate respectively with screw(R) as shown.
22 S x 8 (BLACK) N x 8 (BLACK) 3 x 16 mm N 2 S S S N 1 N S S N N S S N N S S N N Reinforce back plate using part(N) with screw(S) as shown. 23 15 15 15 Align rails, slide the drawers.
Lx2 Jx2 24 4 x 40 mm 6 x 30 mm Align rails, slide the drawers.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
