Lockers Version:07/04/2022 1/12
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size Ax8 6 x 35 mm Ex4 4 x 35 mm Bx8 C x 16 15 x 9 mm 6 x 30 mm Gx8 F x 32 4 x 14 mm Dx4 4 x 30 mm Hx4 4 x 25 mm J x 14 Kx4 Lx1 N x 12 Px2 Q x 14 3 x 16 mm 3/12 Mx1
1 10 4 2 12 5 11 6 5 3 5 7 8 9 4/12
1 Ax4 Bx4 6 x 35 mm Cx8 15 x 9 mm 6 x 30 mm Insert quickfit screw(A) and wooden dowel(C) into No.2 and No.3 plates as shown. Attach No.4 and No.6 plates to the two plates, turn cam locks(B)clockwise to tighten as shown. Please pay attention to the holes where the accessories are inserted and don't use an electric screwdriver or use force to rotate, may cause crack.
3 1 2 4 Insert No.10 and No.11 plates into available slots as shown. Please note connect No.11 and No.10 plates with No.12. 6 3 10 11 12 Cx4 4 6 x 30 mm E x4 4 x 35 mm Cover No.7 plate to the component with wooden dowel(C), use screw(E) to fix.
Dx4 5 Kx4 4 x 30 mm Fix leg(K) to the No.7 with screw(D) as shown. 7 3 1 4 K 6 D D D 2 7 D D F x 16 6 Hx4 Gx8 4 x 14 mm P x2 4 x 25 mm Fix hinge(G) into No.8 and No.9 plates with screw(F) as shown. H H Fix handle(P) to No.8 and No.9 plates with screw(H) 9 as shown.
7 N x 12 Insert part(N) into sides of No.2 and No.3 plates as shown. Put No.5 plates.
F x 16 8 4 x 14 mm Attach No.8 to No.2, No.9 to No.3 by fixing hinge with screw(F) as show.
9 If there is misalignmAent after you install, adjust the screw to the best condition 10/12
10 J x 14 Q x 14 3 x 16 mm Fix part(J) to back board with screw(Q) as shown.
L x1 11 Mx 1 Fix anti-dumping device(L) to top board. Hammer part(M) to your wall, and fix part(L) to part(M) as shown.
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.