Kitchen Island Version:02/21/2023 1/32
IMPORTANT INFORMATION! please read the entire manual before starting to assemble and/or using this product.follow the manual thoroughly and keep it for further reference. AVOID SCRATCHES! In order to avoid scratching this furnuture should be assembled on a soft layer-could be a rug. IMPROVE EFFICIENCY ! Try to find a partner to install with you, which can speed up the installation efficiency and shorten the time. ANTI-TOPPLE WARNING ! Overturned furniture can cause serious or fatal crush injuries.
Please prepare the following tools When installing, please carefully confirm whether each screw corresponds to the manual, accessories with similar shapes can be distinguished by size A x 88(+3) 6 x 35 mm F x 64(+3) 3 x 12 mm L x 24(+2) B x 88(+3) 15 x 10 mm Gx4 40 x 40 mm Mx1 4 x 30 mm C x 70(+3) D x 10 4 x 16 mm 6 x 30 mm H x 12(+1) Jx8 4 x 50 mm N x 10 K x 48(+3) 3.
2 10 1 8 6 8 8 9 9 5 5 6 8 9 9 8 10 8 6 7 8 8 4 14 12 10 3 12 13 11 18 17 19 16 ALWAYS install tipover restraint provided. NEVER put a TV on this product. NEVER allow children to stand,climb or hang on drawers,doors,or shelves. NEVER open more than one drawer at a time. Place heaviest items in the lowest drawers. This is a permanent label.
1 F x 24 CL x 6 CR x 6 3 x 12 mm 250 mm 250 mm Fix slide rail(CL) and(CR) to two plate 5 with screw(F) as shown. F CL F F CL 5 F F 5 F CL F CR F F CR CL F F 2 CR F F F x2 5 Ax8 6 x 35 mm Insert quickfit screw(A) into two plate 5 with a screwdriver as shown.
Cx8 3 6 x 30 mm Insert wooden dowel(C) into plate 9 as shown. C 9 x4 9 C Bx4 4 15 x 10 mm Attach plate 9 to plate 5, put cam lock(B) into holes in plate 9 and turn clockwise to tighten as shown.
5 Bx4 15 x 10 mm Attach another plate 5 to plate 9, put cam lock(B) into holes in plate 9 and turn clockwise to tighten as shown. 9 180° 5 B 5 5 9 B 9 B 9 B 9 90° 5 B 6 Ax8 6 x 35 mm 5 5 A 5 A A A A A A A A Insert quickfit screw(A) into plate 5 with a screwdriver as shown.
7 C x 32 6 x 30 mm Insert wooden dowel(C) into plate 8 as shown. C C 8 8 C C C x8 8 A x 16 6 x 35 mm Insert quickfit screw(A) into two plate 4 with a screwdriver as shown.
Bx8 15 x 10 mm Attach plate 8 to plate 5, put cam lock(B) into holes in plate 8 and turn clockwise to tighten as shown.
Bx8 15 x 10 mm Attach plate 4 to plate 8, put cam lock(B) into holes in plate 8 and turn clockwise to tighten as shown.
Ax8 6 x 35 mm Insert quickfit screw(A) into plate 5 with a screwdriver as shown.
Bx8 15 x 10 mm Attach another plate 8 to plate 5, put cam lock(B) into holes in plate 8 and turn clockwise to tighten as shown.
Bx8 15 x 10 mm Attach another plate 4 to plate 8, put cam lock(B) into holes in plate 8 and turn clockwise to tighten as shown.
Cx8 14 6 x 30 mm Insert wooden dowel(C) into plate 4 and 5 as shown.
Hx8 4 x 50 mm Fix plate 7 to plate 4 and 5 with screw(H) as shown.
A x 14 16 6 x 35 mm Insert quickfit screw(A) into plate 7 and 12 with a screwdriver as shown.
Cx4 Bx4 6 x 30 mm 15 x 10 mm Connect plate 12,13 and 14 together with wooden dowel(C), turn cam lock(B) clockwise to tighten as shown.
Cx8 B x 10 15 x 10 mm 6 x 30 mm Attach the component to plate 7 with wooden dowel(C), turn cam lock(B) clockwise to tighten as shown.
Hx2 19 4 x 50 mm Fix plate 11 to plate 13 with screw(H) as shown.
Hx2 20 4 x 50 mm Fix plate 3 to plate 11 with screw(H) as shown.
Slide plate 6 along available slots as shown.
C x 10 Px8 Qx8 6 x 30 mm 3 x 14 mm Insert wooden dowel(C) into plate 3, 4 and 5 as shown. Reinforce plate 6 using screw(P) with screw(Q) as shown.
A x 10 23 6 x 35 mm Insert quickfit screw(A) into plate 1 and 2 with a screwdriver as shown. A A A 1 A A A A A A 1 A 2 A Dx4 24 K x 16 Jx8 Ex8 3.5 x 14 mm 4 x 16 mm J K K E Fix hinge(J) to plate 10 with screw(K) as shown. Fix handle(D) with screw(E) as shown.
25 B x 10 15 x 10 mm Cover plate 1 and 2 to plate 3,4 and 5, put cam lock(B) into holes in plate 3,4,5 and turn clockwise to tighten as shown.
26 F x 16 Gx4 3 x 12 mm Mx1 N x 10 4 x 20 mm 40 x 40 mm Fix part(M) to plate 1 and 3 with screw(N) as shown. Fix iron sheet(G) to plate 1 and 2 with screw(F) as shown.
27 K x 16 3.5 x 14 mm Attach door plate 10 to plate 4 by fixing hinge using screw(K) as shown.
K x 16 28 3.5 x 14 mm Attach another two door plate 10 to plate 4 by fixing hinge using screw(K) as shown.
L x 24 29 4 x 30 mm Fix plate 16 and 17 to plate 18 with screw(L) as shown. L L 17 18 L 16 L x6 16 L A x 24 30 6 x 35 mm Slide plate 19 along grooves as shown. Insert quickfit screw(A) into plate 15 as shown.
31 B x 24 15 x 10 mm Attach plate 15 to the drawer component, turn cam lock(B) clockwise to tighten as shown. 15 B 15 B 17 180° B B 16 32 Dx6 19 B x6 16 E x 12 4 x 16 mm Fix handle(D) to plate 15 with screw(E) as shown.
33 F x 24 DL x 6 DR x 6 3 x 12 mm 250 mm 250 mm Fix runner(DL) and (DR) to plate 16 and 17 respectively with screw(F) as shown.
34 Align rails, slide all drawers.
35 If there is misalignment after you install, adjust the screw to the best condition 32/32
WARRANTY WARRANTY CLAIMS •There is a 30-day warranty for broken furniture or any other problems that do not work properly. The warranty will start from the date of purchase which must be verified by proof of purchase. •Before making a claim, we may be able to answer your query, simply call us. Please leave your purchase order number, along with some details of the problem, if you want a replacement part. We will arrange within 48 hours. If there is out of stock, we will reply with a shipping date.
RETURNS CHANGED YOUR MIND AND NEED TO RETURN YOU ITEM? PLEASE FOLLOW THE BELOW INSTRUCTIONS: •If you have purchased and have simply changed your mind, follow the retailer’s instructions for returns. DEFECTIVE ITEMS •If your item is defective in any way, i.e. it doesn’t work but you can’t identify why, in the first instance, please call us. DAMAGED ITEMS •If you receive an order with obvious shipping damage from the retailer, then we suggest the delivery is refused.
