Massage Chair CYBER-Relax AS-888 Massage Chair AS-888 Medical Equipment Approval in Japan: No. 27BZ0878 10BZ6001 USER MANUAL Safety precautions..................................................... 2 Features..................................................................... 6 Name and functions of components.......................... 8 Assembly (Back-rest) ............................................. 11 Preparation before use ............................................
Contents IMPORTANT SAFETY INSTRUCTIONS Important Safety Instructions ............................................. 2 Features .............................................................................. 6 Name and functions of components ................................... 8 Assembly (Back-rest)....................................................... 11 Preparation before use...................................................... 12 Reclining and use of foot rest...........................................
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance. DANGER To reduce the risk of electric shock: 1. Always unplug this appliance from electrical outlet immediately after using and before cleaning. 2. Improper connection of the equipment-grounding conductor can result in a risk of electric shock.
IMPORTANT SAFETY INSTRUCTIONS WARNING 13. Grounding Instructions This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances.
IMPORTANT SAFETY INSTRUCTIONS WARNING 19. Do not attempt to stand on the arm rest, foot rest or back rest. Otherwise, the massager may fall down, resulting in injury. 20. Do not use the massager on the head, arm, knee or abdomen. As well as, do not put your hand or leg between knead ball. Otherwise, the user may feel sick or an injury may occur. 21. Do not attempt to plug/unplug the power plug with wet hands. Otherwise, it may result in injury or electric shock. 22.
IMPORTANT SAFETY INSTRUCTIONS WARNING 31. After use, be sure to set the POWER switch to [OFF] position. Otherwise, it may result in accident or injury due to child's mischief. 32. Do not attempt to pull the back pad forcibly or hang from the back pad. Otherwise, the back pad may come off, probably resulting in injury or broken massager. 33. Do not attempt to damage, bend, pull, twist, or bundle the cord forcibly. Otherwise, the cord may break, resulting fire or electric shock. 34.
Features 1. Point Navi sensor (When using the AUTO COURSE only) • Before starting the massage, the Point Navi scans the body shape and the posture. Technique to scan the massage line along the body shape has realized effective massaging. 2. “3D” mode • “Deep” and “Gentle” features have been added to the KNEAD, TAPPING and WAVELET functions. Massage of new sensation relieves stiffened and tired muscles. 3.
Features DEEP KNEAD RUBBING STRETCH Knead-up at a level higher than the hard Knead-down at a lever lower than the soft Relieves stiffness from bottom to top with combined massaging of shiatsu and rolling WHOLE Entire back area of the body is relieved uniformly from stiffness. 5.
Name and functions of components (Main unit) Pillow Turn over to the back before starting the massage. Seat Massages by air the bottom and thighs. Back rest Back pad Relax and lay the back on. Arm rest Space for the remote controller Store the remote controller here after use. Foot rest Air massage is applied to the legs. Seat pad Power switch Turn the switch to “OFF” after use. Power supply fuse Service receptacle (50 W max.) Power consumption exceeding 50 W could cause trouble.
Name and functions of components (Remote controller) “START/RESET” button Starts, stops massaging and stores the knead balls at the specified position. START/ RESET “STOP” button This button allows stopping the massaging movement. Knead balls stop at the position. During the AUTO COURSE, they stop temporarily at the first push and resume the movement at the second push. STOP LCD display Displays detail of setting or cautions.
Name and functions of components Information indicated on LCD display ♦ Display during the AUTO COURSE (See page 16 for method of use.) Displays the name of the AUTO COURSE on the move. 1. REJUVENATE mode 2. REFRESH mode 3.
Assembly (Back-rest) Assembly/Folding Raise the back rest in the arrow direction and confirm that the stopper (enlarged view in the circle) is locked. (You will hear a click.) Hold down the stopper located under the back rest (enlarged view in the circle) in the arrow direction and slowly bring down forward the back rest. * Take care not allow it falling down suddenly.
Preparation before use WARNING Following persons must consult physician before using the product.
Preparation before use Place of installation Secure sufficient spaces around the chair. * Request: As the back rest is reclined, the foot rest is turned up 50 cm or more at the opposite end. Minimum 50 cm of spaces must be secured both at the front and the back of the chair. * Request: Bottom of the chair may damage the tatami mattress or floor. It is recommended to spread a piece of mattress under the chair.
Reclining and use of foot rest (Preparation) • Insert the power cord plug in the receptacle and turn on the power switch on the chair. Reclining the chair 1. While resting your back on the back rest, press the “DOWN” of the RECLINER switch. If you keep holding down the “DOWN” switch, the back rest goes down while the foot rest comes up. Upright condition FOOT REST DOWN UP RECLINER UP DOWN Stimulation by the knead ball is intensified as much as the back rest is turned down.
Reclining and use of foot rest 3. To raise the back rest, press the “UP” button of the RECLINER switch. If you keep holding down the “UP” button, the back rest goes up while the foot rest comes down. FOOT REST RECLINER DOWN UP UP DOWN How to use the foot rest 1. Use the “UP” or “DOWN” button to adjust the angle of foot rest. WARNING Before reclining the back rest or elevating the foot rest, confirm there is nobody, pet or object at the behind, under the foot rest, or others.
Use of the AUTO COURSE (Operate the following with the remote controller lid closed) 1. Turn ON the power switch. (Power switch is found at the back of the left arm rest.) “POINT NAVI SYSTEM” and “PUSH THE START SWITCH” will be shown on the LCD display alternately. (They are displayed regardless whether the lid is opened or closed.) Sit deep in the chair and recline yourself comfortably with the back of your head rest on the back rest.
Use of the AUTO COURSE (Operate the following with the remote controller lid closed) WHOLE BODY During “POINT NAVI” 5. Name of selected COURSE and a message are displayed (for example, in case of “1. REJUVENATE” of “WHOLE BODY” course). Operation of the AUTO COURSE and the body shape detection start simultaneously. 6. During the body shape detection, the detection point is indicated with the lamp and the detection level is shown WHOLE BODY Working “POINT NAVI” with the detection indicator. 7.
Use of the AUTO COURSE (Operate the following with the remote controller lid closed) WHOLE BODY Complated “POINT NAVI” 9. As the cycle time to accept the ADJUST SHOULDER position elapses, Completed “POINT NAVI” is displayed. 10. After showing the CONTOUR OF YOUR BACK for approx.
Use of the AUTO COURSE (Operate the following with the remote controller lid closed) UP AUTO COURSE Push the “AIR” button so that the present setting is SHOLDER high-lighted. DOWN ADJUST SHOLDER 12. You can adjust the AIR setting during the COURSE. WHOLE WAIST • Display will be switched at each push on the “AIR” button and the selected movement will start up. • Section on the move is displayed on the LCD.
When terminating use on the way 1. If you push the “STOP” button during massaging after START/ RESET the body shape detection in the AUTO COURSE, STOP “PAUSE” at the display for type of massage starts to flicker and the knead balls stop on the spot retaining its present position. • To restart the massage, push again the “STOP” button. • To terminate the massage on the way, push the “START/RESET” button. ♦ Knead balls return to the Storing position in this case as well.
Movements during the AUTO COURSE • The AUTO COURSE provides preprogrammed movements only, which are not adjustable. (Single massaging cycle runs for approx. 15 minutes. Contents of the AUTO COURSE are changed automatically depending on the remaining time on the timer or body shape.) • Following illustrations of the AUTO COURSE shows essential points only for better understanding. (WHOLE BODY) (Neck, shoulders, contour of back and waist are massaged uniformly.)
Movements during the AUTO COURSE (NECK, SHOULDER) (Concentrated massaging on the neck and shoulders) NECK, SHOULDER – REJUVENATE mode (Working POINT NAVI) Knead up Knead down Tapping Knead down Knead up Wavelet Stretch/Wavelet Wavelet Knead up Knead down Wavelet Tapping Knead up Knead down Contour of back stretch Regularizing “Regularizing” starts when the remaining time becomes less than 1 minute.
Movements during the AUTO COURSE (WAIST) (Concentrated massaging on the waist) WAIST – REJUVENATE mode (Working POINT NAVI) Contour of back stretch Knead up Tapping Contour of back stretch Stretch/Tapping Knead up Tapping Contour of back stretch Knead up Knead down Stretch/Wavelet Wavelets Contour of back stretch Wavelet Tapping Knead up Knead down Contour of back stretch Regularizing “Regularizing” starts when the remaining time becomes less than 1 minute.
Use of selective functions (Operate the following with the remote controller lid opened) 1. Turn ON the power switch. (Power switch is found at the back of left arm rest.) “POINT NAVI SYSTEM” and “PRESS THE START SWITCH” are shown alternately on the display. (These are displayed regardless whether the lid is opened or POINT NAVI SYSTEM closed.) PRESS THE START SWITCH 2. Open the lid and push the “START/RESET” button. START/ RESET STOP 3.
Use of selective functions (Operate the following with the remote controller lid opened) 6. As the massage completes, the knead balls return to the Storing position automatically while the “Storing” is Storing shown on the display. When terminating the massage on the way. Press the “START/RESET” button. The knead balls return to the Storing position. 7. Turn “OFF” the power switch after use. This prevents the massaging chair from starting inadvertently when the remote controller was operated accidentally.
Movement adjustment of selective functions (WHOLE ⋅ PART” button) TAPPING POINT sp: st: SHOULDER w: AIR: STRONG If you push the “WHOLE ⋅ PART” button while either selected function is operating, the present setting is displayed with high-light on the setting menu. MIN If you push the “WHOLE ⋅ PART” button to select, the display changes 2 seconds later to the “WHOLE” or “PART” of the WHOLE PART PART POINT selective function display.
Movement adjustment of selective functions (When selecting the “ROLLING”) WHOLE PART 1. If you push the “WHOLE ⋅ PART” button when no function is operating after pushing the “START” button, “WHOLE” is displayed with high-light on the setting menu. 2. “WHOLE” and “PART” will be displayed with high-light alternately at each push on the “WHOLE ⋅ PART” button. 3.
Movement adjustment of selective functions (“AIR” button) LEG ⋅ THIGH ⋅ BOTTOM LEG ⋅ THIGH LEG ⋅ BOTTOM LEG STOP If you push the “AIR” button, the current setting is high-lighted. The display changes at each push on the “AIR” button, and the selected movement starts 2 seconds after the selection. (Movement of the selected function is displayed on the LCD.
Movement adjustment of selective functions (“SPEED” button) A push on the “SPEED” button displays the current “SPEED” setting with high-light. 1 : SLOW 2 : NORMAL 3 : FAST * You can select the speeds for the “KNEAD UP”, “KNEAD DOWN”, “TAPPING” and “WAVELET”. The display changes at each push on the “SPEED” button and the movement starts at the selected “SPEED” 2 seconds after the selection. (Selected “SPEED” is displayed on the LCD.
When changing the COURSE on the way (Change from AUTO COURSE → Select function) 1. Open the lid of remote controller when the AUTO WHOLE BODY COURSE (for example, the WHOLE BODY course) is WAVELET STRONG displayed. FOOT STRETCH MIN Just opening the lid causes no change on the display and the massage movement. 2. If you push the “WHOLE⋅ PART” button and then one of ADJUST ▲ WHOLE ⋅ PART UP the “MASSAGE”, “STRETCH” or “3D” and the “AIR” button, the movements of selected functions will start.
When trouble is suspected WA WARNING Never attempt to disassemble, repair or modify the product. It could cause injury by ignition or abnormal movement. Phenomenon Failure to start Interrupted movement (Remote control is disabled.) You may hear the following noises or detect some feeling as described below during operation. However, these are not errors but inherent to the product so that the service life, or others will not be affected.
When trouble is suspected Phenomenon Unable to recline Service receptacle is dead. Inspection Point Check the power cord plug for disconnection. Check the back rest for interference with the wall or other obstruction. Check the power supply fuse for blowing. Remedy Insert the plug in the receptacle securely. Move the chair to clear from obstruction. Replace the fuse (3A). Reference Page 14 13 8 Request: Turn off, turn on, then restart.
(Main unit) Make clean plastic parts, pipes and the arm rest with rags impregnated with neutral detergent and squeezed tightly. Wipe next with dry rags to remove neutral detergent completely. CAUTION Do not use alcohol, other solvent, polishing powder, or others. It could cause damage, discoloration or cracks. CAUTION (Remote controller) Wipe the remote controller with dry rags. Never wipe with wet towel, or others. It could cause trouble.
Care and inspection Check for the following symptoms. Care and inspection • • • Secure a long service life • with occasional inspections! Scorching smell Overheat on the power cord or plug Power is turned on or off when the power cord is moved. Other abnormal condition Stop to use Turn off the switch and remove the power cord plug from the receptacle to prevent trouble or accident. Consult always your dealer or us for inspection or repair.
04/05/30