Owner’s Manual BL00004950-201 EN
Introduction Thank you for your purchase of this product. Be sure that you have read this manual and understood its contents before using the camera. Keep the manual where it will be read by all who use the product. For the Latest Information The latest versions of the manuals are available from: http://fujifilm-dsc.com/en/manual/ The site can be accessed not only from your computer but also from smartphones and tablets. For information on firmware updates, visit: http://www.fujifilm.
P Chapter Index Menu List 1 Before You Begin iv 1 2 First Steps 23 3 Basic Photography and Playback 39 4 Movie Recording and Playback 45 5 Taking Photographs 51 6 The Shooting Menus 101 7 Playback and the Playback Menu 127 8 The Setup Menus 145 9 Shortcuts 163 10 Peripherals and Optional Accessories 171 11 Connections 177 12 Technical Notes 189 iii
Menu List Camera menu options are listed below. Menu List Shooting Menus Adjust settings when shooting photos or movies. N See page 101 for details.
Menu List Playback Menus Adjust playback settings. N See page 133 for details. P 139 140 140 141 142 143 144 144 Setup Menus Adjust basic camera settings. N See page 145 for details.
P Table of Contents Introduction ........................................................................................................... ii For the Latest Information............................................................................................ ii Menu List................................................................................................................ iv Shooting Menus ..........................................................................................................
Table of Contents Attaching a Lens .................................................................................................25 Inserting the Battery and a Memory Card ................................................26 Compatible Memory Cards ......................................................................................29 Charging the Battery ........................................................................................30 Turning the Camera On and Off ..............................
Focus/Exposure Lock ........................................................................................80 The AF-L and AE-L Buttons .......................................................................................80 White Balance......................................................................................................81 WHITE BALANCE ..............................................................................................................82 Custom White Balance ...................
Table of Contents ix 1 Introduction AF ILLUMINATOR.................................................................................................. 105 R RELEASE TYPE ......................................................................................................... 105 N ISO................................................................................................................................. 106 O IMAGE SIZE ...............................................................................
MOVIE ISO ................................................................................................................ 122 FOCUS MODE ........................................................................................................ 122 AF MODE .................................................................................................................. 122 HDMI OUTPUT INFO DISPLAY ...................................................................... 122 4K MOVIE OUTPUT.......................
Table of Contents 8 The Setup Menus xi 1 Introduction 145 The Setup Menu (G/H/I) ........................................................... 146 F DATE/TIME ............................................................................................................... 146 N TIME DIFFERENCE ................................................................................................ 146 Q a .............................................................................................................
V SENSOR CLEANING............................................................................................. 155 t SAVE DATA SET-UP .............................................................................................. 156 FRAME NO................................................................................................................ 156 SAVE ORG IMAGE ................................................................................................. 156 EDIT FILE NAME ......................
Table of Contents 11 Connections 12 Technical Notes 189 Accessories from Fujifilm.............................................................................. 190 Software from Fujifilm................................................................................... 194 FUJIFILM Camera Remote ...................................................................................... 194 FUJIFILM PC AutoSave ..............................................................................................
Supplied Accessories The following are included with the camera: • NP-W126S rechargeable battery • AC-5VG AC power adapter • Plug adapter (Shape of adapter varies with region of sale.) • Detachable Grip • Fixing screw (×2, including one already attached to detachable grip) • Screw cap (×2, including one already attached to camera) • Body cap • USB cable • Shoulder strap • Owner’s Manual (this manual) 1 Introduction N If you purchased a lens kit, check that a lens is included.
About This Manual This manual contains instructions for your FUJIFILM X-T100 digital camera. Be sure you have read and understood its contents before proceeding. Menus and other text in the displays are shown in bold. Illustrations are for explanatory purposes only; drawings may be simplified, while photographs are not necessarily taken with the model of camera described in this manual.
MEMO xvi
Before You Begin 1
Parts of the Camera 1 Before You Begin A Mode dial ...............................................4, 40, 52 B Hot shoe ..........................................................192 C Fn (function) dial ...............................................7 D N (flash pop-up) lever .................................. 98 E Strap eyelet ....................................................... 24 F Connector cover .................................46, 55, 59 G Lens signal contacts..............................
Parts of the Camera 1 Before You Begin V LCD monitor ................................... 9, 10, 12, 13 g Screw cap ..........................................................xiv Touch screen ..................................18, 117, 154 h Selector .................................................................5 W b Delete button............................................. 43 i MENU/OK button .........................................5, 17 X (control lock) button (press and hold) X a (playback) button ..
The Mode Dial To select a shooting mode, rotate the dial until the icon for the desired mode aligns with the index. 1 Mode Description Before You Begin P A S (ADVANCED SR AUTO) The camera automatically optimizes settings 52 to the scene. Aperture and shutter speed can be adjusted using program shift. C S (SHUTTER PRIORITY AE) Select for full control over camera settings, A (APERTURE PRIORITY AE) including aperture (M and A) and/or shutter M (MANUAL) speed (M and S).
Parts of the Camera The Selector Use the efgh buttons to highlight items or access camera functions. A Move cursor up (e) AF (autofocus) button ..............................................................73 B Move cursor right (h) WB (white balance) button ....................................................81 1 C Move cursor down (f) Control Lock To prevent accidental operation of the selector and Q button during shooting, press MENU/OK until X is displayed.
The Command Dials The main and sub-command dials are used for the operations listed below.
Parts of the Camera Fn (function) dial Rotate the function dial to quickly adjust settings for the assigned function during shooting. Mode Adv.
The Indicator Lamp The indicator lamp shows camera status as follows: 1 Before You Begin Indicator lamp Glows green Blinks green Blinks green and orange Glows orange Blinks orange Blinks red Camera status Focus locked. Focus or slow shutter speed warning. Pictures can be taken. • Camera on: Recording pictures. Additional pictures can be taken. • Camera off: Uploading pictures to a smartphone or tablet. Recording pictures. No additional pictures can be taken at this time.
Parts of the Camera The LCD Monitor The LCD monitor can be reversed for self-portraits (P 100) or tilted for ease of viewing, but be careful that your fingers and other objects do not get caught between the monitor and the camera body and avoid touching the wires behind the display. Touching the wires could cause camera malfunction. 1 Before You Begin N The LCD monitor also functions as a touch screen (P 18).
Camera Displays This section lists the indicators that may be displayed during shooting. O For illustrative purposes, displays are shown with all indicators lit. Electronic Viewfinder/LCD Monitor 1 Before You Begin ᵏᵗᵗ ᵎᵏᵍᵎᵏᵍᵐᵎᵏᵖᴾᵏᵎᵘᵎᵎᴾᵟᵫ 5 4 3 2 1 0 -1 -2 -3 -4 -5 ᵫᵤ 1000 5.6 1.0 12800 N Icons that are displayed in both the electronic viewfinder (EVF) and LCD monitor have the same meaning in both displays. Item M in the electronic viewfinder shows the current touch screen mode only.
Camera Displays A Date stamp.....................................................157 B Focus check .............................................78, 152 C Depth-of-field preview.................................. 56 D Location data download status ...............160 E Bluetooth ON/OFF........................................158 F Image transfer status...................................133 G Number of frames selected for upload .........................................................................
Choosing a Display Mode Press the VIEW MODE button to cycle through the following display modes. 1 Option Before You Begin Description Putting your eye to the viewfinder turns the viewfinder on and E EYE SENSOR the LCD monitor off ; taking your eye away turns the viewfinder off and LCD monitor on. EVF ONLY Viewfinder on, LCD monitor off. LCD ONLY LCD monitor on, viewfinder off. Putting your eye to the viewfinder turns the viewfinder on; takEVF ONLY + E ing it away turns the viewfinder off.
Camera Displays Adjusting Display Brightness The brightness and hue of the viewfinder and LCD monitor can be adjusted using the items in the A SCREEN SET-UP menu. Choose EVF BRIGHTNESS or EVF COLOR to adjust viewfinder brightness or hue, LCD BRIGHTNESS or LCD COLOR to do the same for the LCD monitor. O The display in the LCD monitor is unaffected.
The DISP/BACK Button Press DISP/BACK to cycle through display modes as follows. N Indicators for the EVF and LCD must be selected separately. To choose the EVF display, place your eye to the viewfinder while using the DISP/BACK button. 1 Before You Begin Viewfinder Standard Information off LCD Monitor Standard Information off 5 4 3 2 1 0 -1 -2 -3 -4 -5 1000 5.6 1.
Camera Displays Customizing the Standard Display To choose the items shown in the standard display: Display standard indicators. Use the DISP/BACK button to display standard indicators. 2 Select DISP. CUSTOM SETTING. Select A SCREEN SET-UP > DISP. CUSTOM SETTING in the setup menu. 3 Choose items. Highlight items and press MENU/OK to select or deselect.
Camera Displays Virtual Horizon Selecting ELECTRONIC LEVEL displays a virtual horizon. The camera is level when the two lines overlap. Note that the virtual horizon may not be displayed if the camera lens is pointed up or down. 1 Before You Begin Histograms Histograms show the distribution of tones in the image. Brightness is shown by the horizontal axis, the number of pixels by the vertical axis.
Using the Menus To display the menus, press MENU/OK. Shooting Playback P SHOOTING MENU PLAYBACK MENU PROGRAM AE AF/MF SETTING RELEASE TYPE ISO IMAGE SIZE IMAGE QUALITY DYNAMIC RANGE WIRELESS COMMUNICATION RAW CONVERSION ERASE CROP RESIZE PROTECT 1 Before You Begin EXIT IMAGE TRANSFER ORDER EXIT To navigate the menus: 1 Press MENU/OK to display the menus.
Touch Screen Mode The camera’s LCD monitor can be used as a touch screen. Shooting Touch Controls To enable touch controls, select ON for K TOUCH SCREEN SETTING > TOUCH SCREEN ON/OFF. 1 Before You Begin EVF The LCD monitor can be used to select the focus area while pictures are being framed in the electronic viewfinder (EVF). Use K TOUCH SCREEN SETTING > EVF TOUCH SCREEN AREA SETTINGS to choose the area of the monitor employed for touch controls.
Touch Screen Mode Still Photography Mode Description Tap your subject in the display to focus and release the shutter. TOUCH In burst mode, pictures will be taken while you keep your finger SHOOTING on the display. Tap to select a focus point and lock focus. The shutter can be released by pressing the shutter button all the way down. AREA Tap to select a point for focus or zoom. The focus frame will move to the selected point. OFF Touch focus and shooting disabled.
Adjusting Settings The touch screen can be used to adjust settings. The settings available vary with the shooting mode. ᵫᵤ 1 Mode Description Before You Begin FILM SIMULATION Choose a film simulation type. Available in S, P, S, A, and M modes. SCENE POSITION Choose a scene. Available in SP mode. ADVANCED FILTER Choose an advanced filter. Available in Adv. mode. PORTRAIT ENHANCER Choose the portrait enhancement level. Available in h PORTRAIT ENHANCER (Z) mode.
Touch Screen Mode Touch Zoom Touch controls can be used for digital zoom, regardless of the mode selected for K TOUCH SCREEN MODE in the shooting menu. 1 2 Select ON for M TOUCH ZOOM in the shooting menu. N Regardless of where you place your fingers, the camera will zoom in on and out from the center of the frame. The camera will focus on the area selected for F AF/MF SETTING > FOCUS AREA. If AREA is selected for K TOUCH SCREEN MODE, you can select the focus area by tapping the display.
Touch Screen Mode Playback Touch Controls When ON is selected for K TOUCH SCREEN SETTING > TOUCH SCREEN ON/OFF in the setup menu, touch controls can be used for the following playback operations: • Swipe: Swipe a finger across the display 1 to view other images. Before You Begin • Pinch-out: Place two fingers on the display and spread them apart to zoom in. • Pinch-in: Place two fingers on the display and slide them together to zoom out.
First Steps 23
Attaching the Shoulder Strap Attach the strap to the two strap eyelets as shown below. 2 First Steps O Attach the strap as shown. To avoid dropping the camera, be sure the strap is correctly secured.
Attaching a Lens The camera can be used with lenses for the FUJIFILM X-mount. Remove the body cap from the camera and the rear cap from the lens. Place the lens on mount, keeping the marks on the lens and camera aligned (A), and then rotate the lens until it clicks into place (B). 2 not enter the camera and be careful not to touch the camera’s internal parts. Do not press the lens release button while attaching the lens and be sure the latch has securely clicked into place.
Inserting the Battery and a Memory Card Insert the battery and memory card as described below. 1 Open the battery-chamber cover. Slide the battery-chamber latch as shown and open the battery-chamber cover. O Do not remove the battery when the camera is on. Failure to observe this precaution could damage image files or memory cards. 2 First Steps Do not use excessive force when handling the battery-chamber cover. 2 Insert the battery.
Inserting the Battery and a Memory Card 3 Insert the memory card. Holding the card in the orientation shown, slide it in until it clicks into place at the back of the slot. O Be sure card is in the correct orientation; do not insert at an angle or use force. Format memory cards before first use, and be sure to reformat all memory cards after using them in a computer or other device. First Steps 4 2 Close the battery-chamber cover. Close and latch the cover.
Removing the Battery and Memory Card Before removing the battery or memory card, turn the camera off and open the battery-chamber cover. To remove the battery, press the battery latch to the side, and slide the battery out of the camera as shown. 2 O The battery may become hot when used in high-temperature environments. Observe caution when removing the battery. First Steps To remove the memory card, press it in and release it slowly. The card can then be removed by hand.
Inserting the Battery and a Memory Card Compatible Memory Cards Fujifilm and SanDisk SD, SDHC, and SDXC memory cards have been approved for use in the camera; UHS-I cards are supported, while cards with a UHS speed class of 3 or better are recommended for 4K burst, multi-focus, and movie modes. A complete list of approved memory cards is available at http://www.fujifilm.com/ support/digital_cameras/compatibility/. Operation is not guaranteed with other cards.
Charging the Battery The battery is not charged at shipment. Turn the camera off and charge the battery before use. The camera charges the battery internally. O An NP-W126S rechargeable battery is supplied with the camera. Charging takes about 210 minutes. 1 2 First Steps Attach the plug adapter to the AC power adapter. Attach the plug adapter as shown, making sure that it is fully inserted and clicks into place on the AC power adapter terminals.
Charging the Battery Charge Status The indicator lamp shows battery charge status as follows: Indicator lamp Battery status On Battery charging. Off Charging complete. Blinks Battery fault. O The battery will not charge while the camera is on. Use the AC power adapter with the plug adapter for your country or region. Do not short the battery terminals. The battery could overheat. Read the cautions in “The Battery and Power Supply”. Use only battery chargers designated for use with the battery.
Charging the Battery Charging via Computer The battery can be charged by connecting the camera to a computer. Connect the supplied USB cable as shown, making sure the connectors are fully inserted. 2 First Steps • The battery will not charge while the camera is on. • Connect the cable to the camera’s Micro USB (Micro-B) connector. • Connect the camera directly to the computer; do not use a USB hub or keyboard.
Turning the Camera On and Off Use the ON/OFF switch to turn the camera on and off. Rotate the switch to ON to turn the camera on, or to OFF to turn the camera off. O Fingerprints and other marks on the lens or viewfinder can affect picN Press the a button to start playback. Press the shutter button halfway to return to shooting mode. The camera will turn off automatically if no operations are performed for the length of time selected for Z POWER MANAGEMENT > AUTO POWER OFF.
Checking the Battery Level After turning the camera on, check the battery level in the display. Battery level is shown as follows: P 2 First Steps Indicator O (white) M (white) K (white) J (red) A (blinks red) 34 Description Battery partially discharged. Battery about two-thirds charged. Battery about one-third charged. Charge as soon as possible. Low battery. Charge battery. Battery exhausted. Turn camera off and recharge battery.
Basic Setup When you turn the camera on for the first time, you can choose a language and set the camera clock. At default settings, you can also pair the camera with a smartphone or tablet so that you can later synchronize the clocks or download pictures. Follow the steps below when turning the camera on for the first time. N If you intend to pair the camera with a smartphone or tablet, install 1 Turn the camera on. A language-selection dialog will be displayed. 2 Choose a language.
4 Check the time. When pairing is complete, you will be prompted to set the camera clock to the time reported by the smartphone or tablet. Check that the time is correct. N To set the clock manually, press DISP/BACK (P 37). 2 5 First Steps Synchronize the camera settings with the settings configured on your smartphone or tablet. PAIRING REGISTRATION Phone000111111 PAIRING COMPLETE 1/1/2018 12:00 PM SET DATE/TIME FROM SMARTPHONE? SET CANCEL SMARTPHONE SYNC.
Basic Setup Choosing a Different Language To change the language: 1 Display language options. Display the setup menu and select Q a. 2 Choose a language. Highlight the desired option and press MENU/OK. Changing the Time and Date To set the camera clock: 2 First Steps 1 Display DATE/TIME options. Display the setup menu and select F DATE/TIME. 2 Set the clock. Press the selector left or right to highlight the year, month, day, hour, or minute and press up or down to change.
MEMO 38
Basic Photography and Playback 39
Taking Photographs This section explains basic photography. 1 Select S mode. Rotate the mode dial to S (ADVANCED SR AUTO). The following information will be displayed in the LCD monitor. A Scene label: The camera automatically selects the appropriate scene. B The u Icon: Shows that the camera is focusing on the subjects’ eyes.
Taking Photographs 3 Frame the picture. 4 Focus. Press the shutter button halfway to focus. Lenses with Zoom Rings Use the zoom ring to frame the picture in the display. Rotate the ring left to zoom out, right to zoom in. 3 illuminator may light. Focus indicator Focus frame If the camera is able to focus, it will beep twice and focus area and focus indicator will glow green. Focus and exposure will lock while the shutter button is pressed halfway.
a Viewing Pictures Pictures can be viewed in the LCD monitor. To view pictures full frame, press a. 100-0001 3 Basic Photography and Playback Additional pictures can be viewed by pressing the selector left or right or rotating the main command dial. Press the selector or rotate the dial right to view pictures in the order recorded, left to view pictures in reverse order. Keep the selector pressed to scroll rapidly to the desired frame.
b Deleting Pictures Use the b button to delete pictures. O Deleted pictures cannot be recovered. Copy important pictures to a computer or other storage device before proceeding. 1 With a picture displayed full frame, press the b button and select FRAME. ERASE FRAME SELECTED FRAMES ALL FRAMES 3 Press the selector left or right to scroll through pictures and press MENU/OK to delete (a confirmation dialog is not displayed). Repeat to delete additional pictures. N Protected pictures cannot be deleted.
MEMO 44
Movie Recording and Playback 45
F Recording Movies Record movies with sound. 1 Press t to start recording. A recording indicator (V) and the time remaining are displayed while recording is in progress. 4 2 Movie Recording and Playback To end recording, press the t button again. Recording ends automatically when the maximum length is reached or the memory card is full. Using an External Microphone Sound can be recorded with external microphones that connect using jacks 2.
Recording Movies O Use a memory card with a UHS speed class of 3 or better when recording movies. Touch zoom is not available during movie recording. The area recorded when ON is selected for W DIGITAL IMAGE STABILIZER is smaller than that shown in the LCD monitor or electronic viewfinder (EVF). Sound is recorded via the built-in microphone or an optional external microphone. Do not cover the microphone during recording.
Recording Movies Adjusting Movie Settings • Adjust movie settings in the W MOVIE SET-UP menu. • The movie type, frame size, and frame rate can be selected using W MOVIE SET-UP > MOVIE MODE. • The AF-area mode for movie recording is selected using W MOVIE SET-UP > AF MODE; choose from MULTI and AREA. • Focus mode is selected using W MOVIE SET-UP > FOCUS MODE; for continuous focus adjustment, select CONTINUOUS AF or choose SINGLE AF and enable Intelligent Face Detection.
a Viewing Movies View movies on the camera. In full-frame playback, movies are identified by a W icon. Press the selector down to start movie playback. 01/01/2018 10:00 AM PLAY The following operations can be performed while a movie is displayed: e f Full-frame playback — Start playback gh View other pictures Progress is shown in the display during playback. 29m59s O Do not cover the speaker during playback. Sound is not played back if OFF is selected for o SOUND & FLASH.
Viewing Movies Playback Speed Press the selector left or right during playback to adjust playback speed. Speed is shown by the number of arrows (M or N).
Taking Photographs 51
Choosing a Shooting Mode Choose a shooting mode according to the scene or type of subject. S ADVANCED SR AUTO When the mode dial is rotated to S, the camera automatically optimizes settings to suit the scene. The scene is shown by a label in the display. Scene label AUTO PORTRAIT LANDSCAPE NIGHT 5 Scene label MACRO NIGHT PORTRAIT BACKLIT PORTRAIT PORTRAIT Scene label Taking Photographs O The mode selected may vary with shooting conditions.
Choosing a Shooting Mode Program AE (P) Let the camera choose shutter speed and aperture for optimal exposure. Other values that produce the same exposure can be selected with program shift. Rotate the mode dial to P. P will appear in the display. P 1000 5 . 6 12800 5 P Taking Photographs Program Shift Rotate the sub-command dial to choose the desired combination of shutter speed and aperture (program shift). 1000 5 .
Shutter-Priority AE (S) Choose a shutter speed and let the camera adjust aperture for optimal exposure. 1 Rotate the mode dial to S. S will appear in the display. S 5 2 2000 5 . 6 12800 Taking Photographs Use the sub-command dial to choose a shutter speed. O If the correct exposure cannot be achieved at the selected shutter speed, aperture will be displayed in red.
Choosing a Shooting Mode Time (T) Shutter speeds of 1 s or slower are referred to as “long time-exposures”. Use of a tripod is recommended to prevent the camera moving during the exposure. 30 30” N A count-down timer will be displayed while the exposure is in progress. To reduce “noise” (mottling) in long time-exposures, select ON for K LONG EXPOSURE NR. Note that this may increase the time needed to record images after shooting.
Aperture-Priority AE (A) Choose an aperture and let the camera adjust shutter speed for optimal exposure. 1 Rotate the mode dial to A. A will appear in the display. A 5 2 1000 5 . 6 12800 Taking Photographs Use the sub-command dial to choose an aperture. O If the correct exposure cannot be achieved at the selected aperture, shutter speed will be displayed in red.
Choosing a Shooting Mode Manual Exposure (M) Alter exposure from that selected by the camera. 1 Rotate the mode dial to M. M will appear in the display. 5 4 3 2 1 0 -1 -2 -3 -4 -5 01 0.5 M 2 1.0 1.5 2000 5 . 6 2.0 3.0 1.0 5.0 10 12800 Rotate the main command dial to choose a shutter speed and the sub-command dial to choose the aperture. an exposure indicator that shows the amount the picture would be underor over-exposed at current settings.
Exposure Preview To preview exposure in the LCD monitor, select ON for A SCREEN SET-UP > PREVIEW EXP. IN MANUAL MODE. Select OFF when using the flash or on other occasions on which exposure may change when the picture is taken.
Choosing a Shooting Mode Bulb (B) For bulb photography, rotate the main command dial to select a shutter speed of BULB. Use of a tripod is recommended to prevent the camera moving during the exposure. 5 4 3 2 1 0 -1 -2 -3 -4 -5 01 0.5 M 1.0 1.5 BULB 5 . 6 2.0 3.0 5.0 1.0 10 12800 N The shutter will remain open for up to 60 minutes, or for 1 second when the electronic shutter is used. A count-down timer will be displayed while the exposure is in progress.
u PANORAMA Follow an on-screen guide to create a panorama. 1 Rotate the mode dial to u (PANORAMA). 2 To select the size of the angle through which you will pan the camera while shooting, press the selector left. Highlight a size and press MENU/OK. 3 Press the selector right to view a choice of pan directions. Highlight a pan direction and press MENU/OK. 4 Press the shutter button all the way down to start recording. There is no need to keep the shutter button pressed during recording.
Choosing a Shooting Mode O Shooting ends if the shutter button is pressed all the way down during shooting. No panorama may be recorded if the shutter button is pressed before the panorama is complete. Panoramas are created from multiple frames; exposure for the entire panorama is determined by the first frame. The camera may in some cases record an greater or lesser angle than selected or be unable to stitch the frames together perfectly.
Viewing Panoramas In full-frame playback, you can use the sub-command dial to zoom panoramas in or out. Alternatively, you can play the panorama back using the selector. PLAY STOP PAUSE Press the selector down to start playback and press again to pause. Press the selector left or right to choose the pan direction while playback is in progress or to scroll the panorama manually while playback is paused; vertical panoramas will scroll vertically, horizontal panoramas horizontally.
Choosing a Shooting Mode SP SCENE POSITION /h/M/N/O The camera offers a choice of “scenes,” each adapted to particular shooting conditions or a specific type of subject. 1 Rotate the mode dial to SP (SCENE POSITION). The following scenes can be selected directly using the mode dial: Scene h PORTRAIT ENHANCER (Z (Z) N SPORT O NIGHT 2 Press MENU/OK while the mode description is displayed. SCENE POSITION NIGHT(TRIPOD) Clear shots of night scenery with a slow shutter speed.
3 Highlight the desired scene. Scene h PORTRAIT H NIGHT (TRIPOD) p FIREWORKS Q SUNSET R SNOW s BEACH U PARTY V FLOWER W TEXT j MULTIPLE EXPOSURE 5 Taking Photographs 4 64 Description Choose for portraits. Choose this mode for slow shutter speeds when shooting at night. Slow shutter speeds are used to capture the expanding burst of light from a firework. Choose this mode to record the vivid colors in sunrises and sunsets.
Choosing a Shooting Mode j Multiple Exposures Create a photograph that combines two exposures. 1 2 3 Select j MULTIPLE EXPOSURE in the scene position menu. Take the first shot. Press MENU/OK. The first shot will be shown superimposed on the view through the lens and you will be prompted to take the second shot. NEXT RETRY N To return to Step 2 and retake the first EXIT 5 4 Taking Photographs shot, press the selector left.
Adv. ADVANCED FILTER Take photos with filter effects. 1 Rotate the mode dial to Adv. (ADVANCED FILTER). 2 Press MENU/OK while the mode description is displayed. ADVANCED FILTER TOY CAMERA Create shaded borders as taken by toycameras. (nostalgic effect) N If the view through the lens is displayed in the LCD monitor, press MENU/OK and select d ADVANCED FILTER in the shooting menu. 5 3 Highlight one of the following options and press MENU/OK.
Choosing a Shooting Mode Filter L CROSS SCREEN u PARTIAL COLOR (RED) v PARTIAL COLOR (ORANGE) w PARTIAL COLOR (YELLOW) x PARTIAL COLOR (GREEN) y PARTIAL COLOR (BLUE) z PARTIAL COLOR (PURPLE) j FOG REMOVE X SOFT FOCUS Description Create a star pattern where lines radiate out from bright objects. The effects of the cross screen filter can be viewed after shooting. Areas of the image that are the selected color are recorded in that color. All other areas of the image are recorded in black-and-white.
Autofocus Take pictures using autofocus. 1 Use F AF/MF SETTING > FOCUS MODE to choose a focus mode (P 69). 2 Use F AF/MF SETTING > AF MODE to choose an AF mode (P 71). 3 Choose the position and size of the focus frame (P 73). 4 Take pictures. 5 Taking Photographs N For information on the autofocus system, visit: http://fujifilm-x.com/af/en/index.
Autofocus Focus Mode Use the FOCUS MODE option in the F AF/MF SETTING menu to choose how the camera focuses. 1 2 Press MENU/OK to display the menus. 3 Choose from the following options: Select F AF/MF SETTING > FOCUS MODE in the shooting menu. Mode N Regardless of the option selected, manual focus will be used when the lens is in manual focus mode. If ON is selected for F AF/MF SETTING > PRE-AF, focus will be adjusted continuously in modes l and k even when the shutter button is not pressed.
The Focus Indicator The focus indicator turns green when the subject is in focus and blinks white when the camera is unable to focus. Brackets (“( )”) indicate that the camera is focusing and are displayed continuously in mode k. j is displayed in manual focus mode. 5 Taking Photographs 70 P 1000 5 .
Autofocus Autofocus Options (AF Mode) Choose how the camera focuses in modes l and k. 1 2 3 Press MENU/OK and go to the shooting menu. Select F AF/MF SETTING > AF MODE. Choose an AF mode. How the camera focuses depends on the focus mode. Focus Mode l (SINGLE AF) Option Description Sample image Camera focuses on subject in selected focus point. Use for pinSINGLE POINT point focus on selected subject. r 5 z WIDE j ALL Taking Photographs y ZONE Camera focuses on subject in selected focus zone.
Focus Mode k (CONTINUOUS AF) Option Description Sample image Focus tracks subject at selected focus point. Use for subjects moving SINGLE POINT toward or away from camera. r y ZONE z 5 TRACKING Taking Photographs j ALL 72 Focus tracks subject in selected focus zone. Use for subjects that are moving fairly predictably. Focus tracks subjects moving through wide area of frame.
Autofocus Focus-Point Selection Choose a focus point for autofocus. Viewing the Focus-Point Display 1 Press the selector up (AF) to view the focus-point display. 2 Use the selector and sub-command dial to position the focus frame over the desired focus point. N Focus-area selection can also be accessed via the shooting menu.
Selecting a Focus Point Use the selector to choose the focus point and the sub-command dial to choose the size of the focus frame. The procedure varies with the option selected for AF mode.
Autofocus The Focus-Point Display The focus-point display varies with the option selected for AF mode. N Focus frames are shown by small squares (), focus zones by the large squares. r SINGLE POINT AF mode y ZONE z WIDE/TRACKING Choose single focus point. Choose from zones with Position focus frame over 7 × 7, 5 × 5, or 3 × 3 focus subject and press MENU/OK. points.
Autofocus Autofocus Although the camera boasts a high-precision autofocus system, it may be unable to focus on the subjects listed below. • Very shiny subjects such as mirrors or car bodies. • Subjects photographed through a window or other reflective object. • Dark subjects and subjects that absorb rather than reflect light, such as hair or fur. • Insubstantial subjects, such as smoke or flame. • Subjects that show little contrast with the background.
Manual Focus Adjust focus manually. 1 Select MANUAL FOCUS for F AF/MF SETTING > FOCUS MODE. 5 4 3 2 1 0 -1 j will appear in the display. -2 -3 -4 -5 01 0.5 M 2 1.0 1.5 2000 5 . 6 2.0 3.0 1.0 5.0 10 12800 Focus manually using the lens focus ring. Rotate the ring left to reduce the focus distance, right to increase. 5 Take pictures. N Use the I FOCUS RING option in the setup menu to reverse the direction of rotation of the focus ring.
Manual Focus Checking Focus A variety of options are available for checking focus in manual focus mode. The Manual Focus Indicator The manual focus indicator indicates how Focus distance (white line) closely the focus distance matches the distance to the subject in the focus brackets. The white line indicates the distance 5.
d Exposure Compensation Adjust exposure. Rotate the main command dial to adjust exposure. O The amount of compensation available varies with the shooting mode.
Focus/Exposure Lock Compose photographs with off-center subjects. 1 Focus: Position the subject in the focus frame and press the shutter button halfway to lock focus and exposure. Focus and exposure will remain locked while the shutter button is pressed halfway (AF/AE lock). 2 Recompose: Keep the shutter button pressed halfway. 3 Shoot: Press the button all the way down.
WB White Balance For natural colors, choose a white balance option that matches the light source. Press the selector right (WB) to display white balance options. 2 Highlight the desired option and either press MENU/OK to select the highlighted option and view a display where white balance can be finetuned using the selector, or press DISP/BACK to select the highlighted option with no fine tuning. WB SHIFT AUTO 5 R:0 B:0 SET N White balance options can also be accessed from the shooting menu.
WHITE BALANCE The following white balance options are available. Option AUTO h k i j k l m n g Description White balance is adjusted automatically. Measure a value for white balance. Choose a color temperature. For subjects in direct sunlight. For subjects in the shade. Use under “daylight” fluorescent lights. Use under “warm white” fluorescent lights. Use under “cool white” fluorescent lights. Use under incandescent lighting. Reduces the blue cast typically associated with underwater lighting.
White Balance Custom White Balance Choose h to adjust white balance for CUSTOM WB unusual lighting conditions. White balance measurement options will be displayed; frame a white object so that it fills the display and press the shutter button all the way down to measure white balance (to select the most recent custom value and exit without measuring white balance, press DISP/BACK, or press MENU/OK to select the most recent value and display the fine-tuning dialog).
White Balance k: Color Temperature Selecting k in the white balance menu displays a list of color temperatures; highlight a color temperature and press MENU/OK to select the highlighted option and display the fine-tuning dialog. WHITE BALANCE COLOR TEMPERATURE R:0 B:0 SET SHIFT 10000K 9100K 8300K 7700K 7100K Color Temperature Color temperature is an objective measure of the color of a light source, expressed in Kelvin (K).
h Using the Self Timer Use the timer for group- or self-portraits, to prevent blur caused by camera shake, or to release the shutter automatically when selected conditions are met. 1 Press the selector left (h) to display self-timer options. 2 Highlight one of the following options and press MENU/OK. P 86 86 86 87 Option a BUDDY g GROUP OFF P 87 88 — O Stand behind the camera when using the shutter button. Standing in front of the lens can interfere with focus and exposure.
2 SEC/10 SEC The shutter is released 2 or 10 seconds after the shutter button is pressed. 1 Highlight either of the following options in the self-timer menu and press MENU/OK. Option R 2 SEC S 10 SEC 5 2 Description The shutter is released two seconds after the shutter button is pressed. Use to reduce blur caused by the camera moving when the shutter button is pressed. The self-timer lamp blinks as the timer counts down. The shutter is released ten seconds after the shutter button is pressed.
Using the Self Timer SMILE The camera releases the shutter when the subject smiles. 1 Highlight o (SMILE) in the self-timer menu and press MENU/OK. 2 Frame portrait subjects in the display. The camera will initiate face detection and release the shutter when any of the subjects smiles. O The camera may fail to detect subjects who are not facing the camera or whose eyes are obscured by hair or other objects. BUDDY The camera takes a picture when it detects two subjects close together.
Using the Self Timer GROUP The camera takes a picture when it detects the selected number of portrait subjects. 1 2 5 Taking Photographs 88 Highlight g (GROUP) in the self-timer menu and press MENU/OK. Highlight the desired number of subjects (1 to 4) and press MENU/OK (the number of subjects is indicated by h icons in the shooting display). The timer starts only when the selected number of subjects is in the frame; the shutter is released two seconds later.
I Bracketing Automatically vary settings over a series of pictures. 1 Press the selector down (I) to display bracketing options. 2 Press the selector up or down to highlight one of the following: 3 P 90 90 90 Option V WHITE BALANCE BKT Y DYNAMIC RANGE BKT h HDR P 90 91 91 Press the selector left or right to highlight the desired bracketing settings and press MENU/OK to select the highlighted option.
O AE BKT Use S AE BKT SETTING to choose the bracketing amount and number of shots. Each time the shutter button is pressed, the camera will take the specified number of shots: one using the metered value for exposure and the others over- or under-exposed by multiples of the selected bracketing amount. N Regardless of the bracketing amount, exposure will not exceed the limits of the exposure metering system. W ISO BKT Select a bracketing amount (±1, ±2⁄3, or ±1⁄3).
Bracketing Y DYNAMIC RANGE BKT Each time the shutter button is pressed, the camera takes three shots with different dynamic ranges: 100% for the first, 200% for the second, and 400% for the third. N While dynamic range bracketing is in effect, sensitivity will be restrict- ed to a minimum of ISO 800 (or to a minimum of ISO 200 to 800 when an auto option is selected for sensitivity); the sensitivity previously in effect is restored when bracketing ends.
I Continuous Shooting (Burst Mode) Capture motion in a series of pictures. 5 Taking Photographs 1 Press the selector down (I) to display continuous shooting options. 2 Press the selector up or down to highlight I CONTINUOUS (P 93) or e 4K (P 94). 3 Press the selector left or right to highlight the desired option and press MENU/OK to select. The frame rate for continuous shooting can be selected from J HIGH or O LOW and the shooting mode for 4K recording from f 4K BURST or g MULTI FOCUS MODE.
Continuous Shooting (Burst Mode) I CONTINUOUS The camera takes pictures at the selected frame rate (J HIGH or O LOW) while the shutter button is pressed. Shooting ends when the shutter button is released or the memory card is full. O If file numbering reaches 999 before shooting is complete, the remaining pictures will be recorded to a new folder. Burst shooting may not begin if the space available on the memory card is insufficient.
e 4K Shoot a burst of 4K pictures and choose which shots to save. With e 4K highlighted in the drive mode 4K BURST menu, press the selector left or right to highlight f 4K BURST or g MULTI FOCUS MODE. O Use a memory card with a UHS speed class of 3 or better. Selecting 4K burst or multi-focus mode reduces the picture angle. f 4K BURST Choose the frames you wish to save from a thumbnail list. 5 Taking Photographs 1 Shoot a burst of pictures with e 4K > f 4K BURST selected for drive mode.
Continuous Shooting (Burst Mode) 3 Press the selector left or right to highlight frames and press Q to save the highlighted frame as a separate image. 90/360 SWITCH DISPLAY SAVE 4 EXIT After saving the desired frames, press DISP/BACK to exit the thumbnail list. O If the subject moves during shooting, the image may be distorted, while banding may occur in images taken under flickering or transient light sources such as fluorescent lights.
g MULTI FOCUS MODE Take a series of pictures at different focus distance and create a composite image from selected shots. 1 Shoot a burst of pictures with e 4K > g MULTI FOCUS MODE selected for drive mode. N The camera will shoot a burst of pictures each time the shutter button is pressed. There is no need to keep the shutter button pressed during shooting. 2 In full-frame playback, display a picture taken with g MULTI FOCUS MODE.
Continuous Shooting (Burst Mode) O A tripod is recommended; if no tripod is available, hold the camera steady during shooting. If the subject moves during shooting, the image may be distorted or unnatural, while banding may occur in images taken under flickering or transient light sources such as fluorescent lights. The process of creating a composite image reduces the angle of view. The desired results may not be achieved with moving subjects, distant landscapes, or subjects that lack depth.
Using the Flash Use the built-in flash for additional lighting when shooting at night or indoors under low light. 1 Slide the N (flash pop-up) lever as shown. 2 3 Press MENU/OK to display the shooting menu. 4 Highlight one of the following options and press MENU/OK. 5 Highlight p FLASH SET-UP > FLASH MODE in the shooting menu and press MENU/OK to view flash options.
Using the Flash Mode D COMMANDER P SUPPRESSED FLASH Description The built-in flash can be used to control optional remote flash units. The flash does not fire even when the subject is poorly lit. A tripod is recommended. * Red-eye removal is available in these modes when Intelligent Face Detection is active and red-eye removal is on. Red-eye removal minimizes “red-eye” caused when light from the flash is reflected from the subject’s retinas.
Self-Portraits (Selfies) To shoot a self-portrait, rotate the LCD monitor as shown. N When the monitor is opened to approximately 180°: • F AF/MF SETTING > FACE/EYE DETECTION SETTING is automatically set to FACE ON/EYE AUTO 5 • Pictures will automatically be displayed for 1.5 seconds after shoot- Taking Photographs ing, regardless of the option selected for A SCREEN SET-UP > IMAGE DISP.
The Shooting Menus 101
SHOOTING MENU (A/B/C/D/E) Adjust shooting settings. The shooting menu is displayed when you press MENU/OK in shooting mode. Choose from tabs A, B, C, D, or E. P SHOOTING MENU PROGRAM AE AF/MF SETTING RELEASE TYPE ISO IMAGE SIZE IMAGE QUALITY DYNAMIC RANGE EXIT N The options available vary with the shooting mode selected. A SCENE POSITION Choose a scene for SP mode (P 63). d ADVANCED FILTER Choose an advanced filter for Adv. mode (P 66). 6 F AF/MF SETTING Adjust focus settings.
SHOOTING MENU RELEASE/FOCUS PRIORITY Choose how the camera focuses in focus mode AF-S (l) or AF-C (k). Option RELEASE FOCUS Description Shutter response is prioritized over focus. Pictures can be taken when the camera is not in focus. Focus is prioritized over shutter response. Pictures can be only taken when the camera is in focus. AF+MF If ON is selected in focus mode l, focus can be adjusted manually by rotating the focus ring while the shutter button is pressed halfway.
FACE/EYE DETECTION SETTING Intelligent Face Detection sets focus and exposure for human faces anywhere in the frame, preventing the camera from focusing on the background in group portraits. Choose for shots that emphasize portrait subjects. Faces can be detected with the camera in vertical or horizontal orientation; if a face is detected, it will be indicated by a green border.
SHOOTING MENU PRE-AF If ON is selected, the camera will continue to adjust focus even when the shutter button is not pressed halfway. Note that this increases the drain on the battery. Options ON OFF AF ILLUMINATOR If ON is selected, the AF-assist illuminator will light to assist autofocus. Options ON OFF O The AF-assist illuminator turns off automatically when OFF is selected for o SOUND & FLASH in the setup menu. The camera may be unable to focus using the AF-assist illuminator in some cases.
N ISO Adjust the camera’s sensitivity to light. Option AUTO1 AUTO2 AUTO3 12800–200 H (25600/51200), L (100) Description Sensitivity is automatically adjusted in response to shooting conditions. Choose the base sensitivity, maximum sensitivity, and minimum shutter speed for AUTO1, AUTO2, and AUTO3. Adjust sensitivity manually. Selected value is shown in display. Choose for special situations. Note that mottling may appear in pictures taken at H, while L reduces dynamic range.
SHOOTING MENU The camera automatically chooses a sensitivity between the default and maximum values; sensitivity is only raised above the default value if the shutter speed required for optimal exposure would be slower than the value selected for MIN. SHUTTER SPEED. N If the value selected for DEFAULT SENSITIVITY is higher than that se- lected for MAX. SENSITIVITY, DEFAULT SENSITIVITY will be set to the value selected for MAX. SENSITIVITY. The camera may select shutter speeds slower than MIN.
T IMAGE QUALITY Choose a file format and compression ratio. Select FINE or NORMAL to record JPEG images, RAW to record RAW images, or FINE+RAW or NORMAL+RAW to record both JPEG and RAW images. FINE and FINE+RAW use lower JPEG compression ratios for higher-quality JPEG images, while NORMAL and NORMAL+RAW use higher JPEG compression ratios to increase the number of images that can be stored. The Fn (Function) Button To toggle RAW image quality on or off for a single shot, assign RAW to the Fn button (P 168).
SHOOTING MENU U DYNAMIC RANGE Control contrast. Choose lower values to increase contrast when shooting indoors or under overcast skies, higher values to reduce loss of detail in highlights and shadows when photographing high-contrast scenes.
P FILM SIMULATION Simulate the effects of different kinds of film, including blackand-white (with or without color filters). Choose a palette according to your subject and creative intent. Option c PROVIA/STANDARD d Velvia/VIVID e ASTIA/SOFT i CLASSIC CHROME g PRO Neg. Hi h PRO Neg. Std 6 b MONOCHROME The Shooting Menus e MONOCHROME + Ye FILTER d MONOCHROME + R FILTER f MONOCHROME + G FILTER f SEPIA Description Standard color reproduction.
SHOOTING MENU X FILM SIMULATION BKT Choose the three film simulation types used for film simulation bracketing (P 90, 110). Options c PROVIA/STANDARD d Velvia/VIVID i CLASSIC CHROME g PRO Neg. Hi MONOCHROME + e b MONOCHROME Ye FILTER f MONOCHROME + G FILTER e ASTIA/SOFT h PRO Neg. Std d MONOCHROME + R FILTER f SEPIA B SELF-TIMER Use the timer for group- or self-portraits, to prevent blur caused by camera shake, or to release the shutter automatically when selected conditions are met (P 85).
o INTERVAL TIMER SHOOTING Configure the camera to take photos automatically at a preset interval. If desired, frames shot using interval timer shooting can be joined to form a time-lapse movie. 1 Highlight o INTERVAL TIMER SHOOTING in the shooting menu and press MENU/OK. 2 Use the selector to choose the interval and number of shots. Press MENU/OK to proceed.
SHOOTING MENU 5 Shooting will start automatically. 6h12m30s 3/999 CANCEL O Interval timer photography cannot be used at a shutter speed of B (bulb) or HDR, e (4K), or during panorama or multiple exposure photography. In burst mode, only one picture will be taken each time the shutter is released. N Use of a tripod is recommended. Check the battery level before starting. We recommend using an optional AC-9V AC power adapter and CP-W126 DC coupler.
D WHITE BALANCE For natural colors, choose a white balance option that matches the light source (P 81). f COLOR Adjust color density. Choose from 5 options between +2 and −2. +2 +1 Options 0 −1 −2 q SHARPNESS Sharpen or soften outlines. Choose from 5 options between +2 and −2. +2 6 +1 Options 0 −1 −2 r HIGHLIGHT TONE Adjust the appearance of highlights. Choose from 5 options between +2 and −2.
SHOOTING MENU s SHADOW TONE Adjust the appearance of shadows. Choose from 5 options between +2 and −2. +2 +1 Options 0 −1 −2 h NOISE REDUCTION Reduce noise in pictures taken at high sensitivities. Choose from 5 options between +2 and −2. +2 +1 Options 0 −1 −2 K LONG EXPOSURE NR Select ON to reduce mottling in long time-exposures.
S AE BKT SETTING Adjust exposure bracketing settings (P 90). FRAMES/STEP SETTING Choose the number of shots and exposure step width for exposure bracketing. Option FRAMES STEP Description Choose the number of shots in the bracketing sequence. Choose the amount exposure changes with each shot. 1 FRAME/CONTINUOUS Choose the operation performed by pressing the shutter button during exposure bracketing. Option 1 FRAME CONTINUOUS 6 Description One photo is taken each time the shutter button is pressed.
SHOOTING MENU K TOUCH SCREEN MODE Choose whether touch controls can be used to select the focus area or release the shutter (P 18). M TOUCH ZOOM Enable touch digital zoom (P 21). l MOUNT ADAPTOR SETTING Adjust settings for M-mount lenses connected using an optional FUJIFILM M MOUNT ADAPTER. Choosing a Focal Length If the lens has a focal length of 21, 24, 28, or 35 mm, choose a matching option in the l MOUNT ADAPTOR SETTING menu.
Color Shading Correction Color (shading) variations between the center and edges of the frame can be adjusted separately for each corner. To use color shading correction, follow the steps below. NEXT SET 1 Rotate the sub-command dial to choose a corner. The selected corner is indicated by a triangle. 2 Use the selector to adjust shading until there is no visible difference in color between the selected corner and the center of the image.
SHOOTING MENU m SHOOT WITHOUT LENS Choose ON to enable the shutter release when no lens is attached. Options ON OFF c MF ASSIST Choose how focus is displayed in manual focus mode. Option STANDARD FOCUS PEAK HIGHLIGHT Description Focus is displayed normally. The camera heightens high-contrast outlines. Choose a color and peaking level. C PHOTOMETRY Choose how the camera meters exposure. O The selected option will only take effect when F AF/MF SETTING > FACE/EYE DETECTION SETTING is FACE OFF/EYE OFF.
v INTERLOCK SPOT AE & FOCUS AREA Select ON to meter the current focus frame when SINGLE POINT is selected for F AF/MF SETTING > AF MODE and SPOT is selected for C PHOTOMETRY. Options ON OFF p FLASH SET-UP Adjust flash settings. FLASH MODE Choose a flash mode (P 98). FLASH COMPENSATION Adjust flash brightness. Choose from values between +2 EV and –2 EV. Note that the desired results may not be achieved depending on shooting conditions and the distance to the subject.
SHOOTING MENU W MOVIE SET-UP Adjust movie-recording options. MOVIE MODE Choose a frame size and rate for movie recording. Option Frame size 3840 × 2160 (4K) V 2160/15P * i 1080/59.94P i 1080/24P 1920 × 1080 (Full HD) i 1080/50P i 1080/23.98P h 720/59.94P h 720/24P 1280 × 720 (HD) h 720/50P h 720/23.98P Rate 15 fps 59.94 fps, 50 fps, 24 fps, 23.98 fps * Use a memory card with a UHS speed class of 3 or better when recording time-lapse movies that will be viewed on the camera.
MOVIE ISO Choose the sensitivity for movie recording from AUTO or from settings between ISO 400 and 6400. N This setting has no effect on photographs. FOCUS MODE Choose the focus mode for movie recording. Option MANUAL FOCUS CONTINUOUS AF SINGLE AF Description Focus manually. The camera focuses using AF-C. The camera focuses using AF-S. AF MODE Choose how the camera selects the focus point for movie recording. Option MULTI AREA 6 Description Automatic focus-point selection.
SHOOTING MENU 4K MOVIE OUTPUT Choose the destination for 4K movies shot while the camera is connected to an HDMI recorder or other device that supports 4K. Option b CARD HDMI Description 4K movies are recorded to a camera memory card and output to the HDMI device in 4K. 4K movies are output to the HDMI device in 4K. The camera does not record 4K movies to a memory card.
L IS MODE Choose from the following image stabilization options: Option Description L CONTINUOUS Image stabilization on. If +MOTION is selected, the cam+MOTION era will adjust shutter speed to reduce motion blur when a l CONTINUOUS moving objects are detected. M SHOOTING As above, except that image stabilization is performed only when the shutter button is pressed halfway (focus mode +MOTION k only) or the shutter is released.
SHOOTING MENU r WIRELESS COMMUNICATION Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can be used to browse the images on the camera, download selected images, control the camera remotely, or upload location data to the camera. N For downloads and other information, visit: http://app.fujifilm-dsc.com/en/camera_remote/ x SHUTTER TYPE Choose the shutter type. Choose the electronic shutter to mute the shutter sound.
SHOOTING MENU T ELECTRONIC ZOOM SETTING Select ON to enable power zoom when the LCD monitor is opened horizontally to approximately 180°. Zoom can be adjusted by rotating the sub-command dial.
Playback and the Playback Menu 127
The Playback Display This section lists the indicators that may be displayed during playback. O For illustrative purposes, displays are shown with all indicators lit. 01/01/2018 10:00 AM Playback and the Playback Menu 7 A Date and time.........................................35, 146 B Bluetooth ON/OFF........................................158 C Image transfer order ....................................133 D Image transfer status...................................
The Playback Display The DISP/BACK Button The DISP/BACK button controls the display of indicators during playback. Standard Information off 01/01/2018 10:00 AM 5.6 +1.0 Playback and the Playback Menu 1/1000 12800 01/01/2018 10:00 AM 01/01/2018 10:00 AM FAVORITES Favorites NEXT Info display 1 7 LENS 23.0mm F5.6 23.0mm sRGB ON FOCAL LENGTH COLOR SPACE LENS MODULATION OPT. S.S 1/1000 F 5.6 ISO 12800 +1.
The Playback Display Zooming in on the Focus Point Press the center of the sub-command dial to zoom in on the focus point. Press the center of the sub-command dial again to return to full-frame playback.
Viewing Pictures Read this section for information on playback zoom and multi-frame playback. Use the sub-command dial to go from full-frame playback to playback zoom or multi-frame playback.
Viewing Pictures Playback Zoom Rotate the sub-command dial right to zoom in on the current picture, left to zoom out. To exit zoom, press DISP/BACK, MENU/OK, or the center of the sub-command dial. N The maximum zoom ratio varies with the option selected for O IMAGE SIZE. Playback zoom is not available with cropped or resized copies saved at a size of a.
The Playback Menu (K/L/M) Adjust playback settings. The playback menu is displayed when you press MENU/OK in playback mode. Choose from tabs K, L, or M. PLAYBACK MENU IMAGE TRANSFER ORDER WIRELESS COMMUNICATION RAW CONVERSION ERASE CROP RESIZE PROTECT EXIT 1 Select U IMAGE TRANSFER ORDER > SELECT FRAMES in the playback menu. 2 Highlight photos and press MENU/OK to select or deselect. Repeat until all the desired photos have been selected. 3 Press DISP/BACK to exit to playback.
r WIRELESS COMMUNICATION Connect to smartphones running the latest version of the FUJIFILM Camera Remote app. The smartphone can be used to browse the images on the camera, download selected images, control the camera remotely, or upload location data to the camera. N For downloads and other information, visit: http://app.fujifilm-dsc.
The Playback Menu 3 4 Press the selector up or down to highlight a setting and press the selector right to display options. Press the selector up or down to highlight the desired option and press MENU/OK to select and return to the settings list. Repeat this step to adjust additional settings. RAW CONVERSION 撮影時条件を反映 100% 増感/減感 200% ダイナミックレンジ 400% フイルムシミュレーション ホワイトバランス WBシフト Press the Q button to preview the JPEG copy and press MENU/OK to save. Setting REFLECT SHOOTING COND.
A ERASE Delete individual pictures, multiple selected pictures, or all pictures. O Deleted pictures cannot be recovered. Protect important pictures or copy them to a computer or other storage device before proceeding. Option FRAME SELECTED FRAMES ALL FRAMES Description Delete pictures one at a time. Delete multiple selected pictures. Delete all unprotected pictures. Playback and the Playback Menu FRAME 1 Select FRAME for ERASE in the playback menu.
The Playback Menu SELECTED FRAMES 1 Select SELECTED FRAMES for ERASE in the playback menu. Highlight pictures and press MENU/OK to select or deselect (pictures in photobooks or printer orders are shown by S). Selected pictures are indicated by check marks (R). 3 When the operation is complete, press DISP/BACK to display a confirmation dialog. 4 Highlight OK and press MENU/OK to delete the selected pictures. ALL FRAMES 1 Select ALL FRAMES for ERASE in the playback menu.
G CROP Create a cropped copy of the current picture. Playback and the Playback Menu 7 1 2 3 Display the desired picture. 4 5 Press MENU/OK to display a confirmation dialog. Select G CROP in the playback menu. Use the sub-command dial to zoom in and out and press the selector up, down, left, or right to scroll the picture until the desired portion is displayed. Press MENU/OK again to save the cropped copy to a separate file.
The Playback Menu D PROTECT Protect pictures from accidental deletion. Highlight one of the following options and press MENU/OK. • FRAME: Protect selected pictures. Press the selector left or right to view pictures and press MENU/OK to select or deselect. Press DISP/BACK when the operation is complete. • SET ALL: Protect all pictures. • RESET ALL: Remove protection from all pictures. O Protected pictures will be deleted when the memory card is formatted. 1 2 3 Display the desired picture.
B RED EYE REMOVAL Remove red-eye from portraits. The camera will analyze the image; if red-eye is detected, the image will be processed to create a copy with reduced red-eye. 1 2 3 Display the desired picture. Select B RED EYE REMOVAL in the playback menu. Press MENU/OK. N Results vary depending on the scene and the camera’s success in dePlayback and the Playback Menu 7 tecting faces.
The Playback Menu m PHOTOBOOK ASSIST Create books from your favorite photos. Creating a Photobook 1 Select NEW BOOK for m PHOTOBOOK ASSIST in the playback menu. 2 Scroll through the images and press the selector up to select or deselect. Press MENU/OK to exit when the book is complete. N Neither photographs a or smaller nor movies can be selected The first picture selected becomes the cover image. Press the selector down to select the current image for the cover instead.
Viewing Photobooks Highlight a book in the photobook assist menu and press MENU/OK to display the book, then press the selector left or right to scroll through the pictures. Playback and the Playback Menu Editing and Deleting Photobooks Display the photobook and press MENU/OK. The following options will be displayed; select the desired option and follow the onscreen instructions. • EDIT: Edit the book as described in “Creating a Photobook”. • ERASE: Delete the book.
The Playback Menu K PRINT ORDER (DPOF) Create a digital “print order” for DPOF-compatible printers. 1 2 Select K PRINT ORDER (DPOF) in the playback menu. 3 Display a picture you wish to include in or remove from the print order. 4 Press the selector up or down to choose the number of copies (up to 99). To remove a picture from the order, press the selector down until the number of copies is 0.
The Playback Menu V instax PRINTER PRINT Print pictures on optional Fujifilm instax SHARE printers (P 186). J DISP ASPECT Choose how High Definition (HD) devices display pictures with an aspect ratio of 3∶2 (this option is available only when an HDMI cable is connected). Select 16∶9 to display the image so that it fills the screen with its top and bottom cropped out, 3∶2 to display the entire image with black bands at either side.
The Setup Menus 145
The Setup Menu (G/H/I) Adjust basic camera settings. To access basic camera settings, press MENU/OK and select tab G, H, or I. SET-UP DATE/TIME TIME DIFFERENCE ENGLISH RESET SOUND & FLASH SOUND SET-UP SCREEN SET-UP ON EXIT F DATE/TIME Set the camera clock (P 37). N TIME DIFFERENCE Switch the camera clock instantly from your home time zone to the local time at your destination when traveling.
The Setup Menu R RESET Reset shooting or setup menu options to default values. 1 Highlight the desired option and press MENU/OK. Option Description Reset all shooting menu settings other than custom SHOOTING MENU RESET white balance to default values. Reset all setup menu settings other than SET-UP RESET F DATE/TIME, N TIME DIFFERENCE, and r CONNECTION SETTING to default values. 2 A confirmation dialog will be displayed; highlight OK and press MENU/OK.
b SOUND SET-UP Adjust sound settings. OPERATION VOL. Adjust the volume of the sounds produced when camera controls are operated. Choose eOFF to disable control sounds. Options b (high) c (medium) d (low) eOFF (mute) SHUTTER VOLUME Adjust the volume of the sounds produced by the electronic shutter. Choose eOFF to disable the shutter sound. Options b (high) c (medium) d (low) eOFF (mute) SHUTTER SOUND Choose the sound made by the electronic shutter.
The Setup Menu A SCREEN SET-UP Adjust display settings. IMAGE DISP. Choose how long images are displayed after shooting. Colors may differ slightly from those in the final image and “noise” mottling may be visible at high sensitivities. Note that at some settings, the camera will display pictures after shooting regardless of the option selected. Option CONTINUOUS 1.5 SEC 0.5 SEC OFF Description Pictures are displayed until the MENU/OK button is pressed or the shutter button is pressed halfway.
EVF BRIGHTNESS Adjust the brightness of the display in the electronic viewfinder. Select MANUAL to choose from 11 options from +5 (bright) to −5 (dark), or select AUTO for automatic brightness adjustment. Options MANUAL AUTO EVF COLOR Adjust the hue of the display in the electronic viewfinder. +5 +4 +3 +2 Options 0 −1 −2 −3 −4 −5 +1 Options 0 −1 −2 −3 −4 −5 +1 Options 0 −1 −2 −3 −4 −5 +1 LCD BRIGHTNESS Adjust monitor brightness.
The Setup Menu FRAMING GUIDELINE Choose a framing grid for shooting mode. Option G GRID 24 F GRID 9 Display P For “rule of thirds” composition. P H HD FRAMING P A six-by-four grid. Frame HD pictures in the crop shown by the lines at the top and bottom of the display. N Framing guides are not shown at default settings but can be displayed using A SCREEN SET-UP > DISP. CUSTOM SETTING (P 15).
AUTOROTATE PB Choose ON to automatically rotate “tall” (portrait-orientation) pictures during playback. Options ON OFF FOCUS CHECK If ON is selected, the display will automatically zoom in on the selected focus area when the focus ring is rotated in manual focus mode. Options ON OFF O Pressing the center of the sub-command dial cancels focus zoom. FOCUS SCALE UNITS Choose the units used for the focus distance indicator. The Setup Menus Options METERS DISP.
The Setup Menu h BUTTON SETTING Choose the roles played by camera controls. FUNCTION (Fn) SETTING Choose the roles played by the function button, touch function gestures, and function dial (P 169). N Role selection can also be accessed by pressing and holding the function or DISP/BACK button. EDIT/SAVE QUICK MENU Choose the items displayed in the quick menu (P 167). N The quick menu can also be accessed in shooting mode by holding the Q button.
K TOUCH SCREEN SETTING Adjust touch control settings. TOUCH SCREEN ON/OFF Enable or disable touch controls. Option ON OFF Description Enable touch controls. Disable touch controls. EVF TOUCH SCREEN AREA SETTINGS Select the area of the LCD monitor used for touch controls while the viewfinder is active. The area used for touch controls can be selected from. The Setup Menus Option 6 0 2 4 1 3 5 OFF 8 154 Description The entire screen can be used. Only the right half of the screen can be used.
The Setup Menu Z POWER MANAGEMENT Adjust power management settings. AUTO POWER OFF Choose the length of time before the camera turns off automatically when no operations are performed. Shorter times increase battery life; if OFF is selected, the camera must be turned off manually. Options 2 MIN 5 MIN OFF HIGH PERFORMANCE Select ON for faster focus and to reduce the time needed to restart the camera after it has been turned off.
t SAVE DATA SET-UP Adjust file management settings. FRAME NO. New pictures are stored in image files named using a four-digit file number assigned by adding one to the last file number used. The file number is displayed during playback as shown. FRAME NO. controls whether file numbering is reset to 0001 when a new memory card is inserted or the current memory card is formatted.
The Setup Menu EDIT FILE NAME Change the file name prefix. sRGB images use a four-letter prefix (default “DSCF”), Adobe RGB images a three-letter prefix (“DSF”) preceded by an underscore. Option sRGB AdobeRGB Default prefix DSCF _DSF Sample file name ABCD0001 _ABC0001 DATE STAMP Stamp the time and/or date of recording on photographs as they are taken. Option R+S R OFF Description Stamp new photographs with the date and time of recording. Stamp new photographs with the date of recording.
r CONNECTION SETTING Adjust settings for connection to wireless devices, including smartphones, computers, and Fujifilm instax SHARE printers. N For more information on wireless connections, visit: http://fujifilm-dsc.com/wifi/ Bluetooth SETTINGS Adjust Bluetooth settings. Option PAIRING REGISTRATION DELETE PAIRING REG. Bluetooth ON/OFF The Setup Menus 8 AUTO IMAGE TAGGING SEAMLESS TRANSFER SMARTPHONE SYNC.
The Setup Menu N Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet before pairing the device with your camera or uploading images. When ON is selected for both Bluetooth ON/OFF and AUTO IMAGE TAGGING and OFF is chosen for SEAMLESS TRANSFER, upload to paired devices will begin when the camera is turned off or shortly after you exit to playback.
GENERAL SETTINGS Adjust settings for connection to wireless networks. Option The Setup Menus 8 Description Choose a name (NAME) to identify the camera on the wireNAME less network (the camera is assigned a unique name by default). Choose ON (the default setting, recommended in most circumstances) to resize larger images to H for upload to RESIZE IMAGE FOR smartphones, OFF to upload images at their original size.
The Setup Menu K FORMAT To format a memory card: 1 2 Highlight K FORMAT in the setup menu and press MENU/OK. A confirmation dialog will be displayed. To format the memory card, highlight OK and press MENU/OK. To exit without formatting the memory card, select CANCEL or press DISP/BACK. FORMAT FORMAT OK? ERASE ALL DATA OK CANCEL SET O All data—including protected pictures—will be deleted from the memory card. Be sure important files have been copied to a computer or other storage device.
MEMO 162
Shortcuts 163
Shortcut Options Customize camera controls to suit your style or situation. Frequently-used options can be added to the Q menu or assigned to the Fn (function) button for direct access: • The Q menu (P 165): The Q menu is displayed by pressing the Q button. Use the Q menu to view or change the options selected for frequently-used menu items. • The function button (P 168): Use the function button for direct access to selected features.
The Q (Quick Menu) Button Press Q for quick access to selected options.
Viewing and Changing Settings 1 Press Q to display the quick menu during shooting. 2 Use the selector to highlight items and rotate the main/sub-command dial to change. WHITE BALANCE SET Shortcuts 9 3 END Press Q to exit when settings are complete. N The shooting mode is the current shooting mode and cannot be changed from the quick menu. h CUSTOM and k COLOR TEMPERATURE white balance options cannot be accessed using the Q button. Use a function button or the shooting menu.
The Q (Quick Menu) Button Editing the Quick Menu To choose the items displayed in the quick menu: 1 Press and hold the Q button during shooting. 2 The current quick menu will be displayed; use the selector to highlight the item you wish to change and press MENU/OK. 3 Highlight any of the following options and press MENU/OK to assign it to the selected position.
The Fn (Function) Button Assign a role to the function button for quick access to the selected feature. N The functions assigned to T-Fn1 through T-Fn4 can be accessed by flicking the monitor. Pre-assigned roles can be accessed using the function dial (P 7).
The Fn (Function) Button Assigning a Role to the Function Button The roles assigned to the Fn (Function) button and touch function gestures can be selected using h BUTTON SETTING > FUNCTION (Fn) SETTING.
The Fn (Function) Button Assigning a Role to the Function Dial The following functions can be assigned to the function dial using h BUTTON SETTING > FUNCTION (Fn) SETTING: • ISO • SELF-TIMER • IMAGE SIZE • IMAGE QUALITY • DYNAMIC RANGE • FILM SIMULATION • WHITE BALANCE • PHOTOMETRY • AF MODE • FOCUS MODE • RELEASE TYPE • FLASH MODE • FLASH COMPENSATION • MOVIE MODE • FACE/EYE DETECTION SETTING • SHUTTER TYPE • EXPO. COMP. • DEFAULT • NONE N To disable the function dial, choose NONE.
Peripherals and Optional Accessories 171
Lenses The camera can be used with lenses for the FUJIFILM X-mount. Peripherals and Optional Accessories 10 15 -4 5 15 -4 5 Lens Parts A Focus ring B Zoom ring C Mounting marks D Lens signal contacts E Front lens cap F Rear lens cap N A XC15-45mmF3.5-5.6 OIS PZ is used here for illustrative purposes.
Lenses Power Zoom When ON is selected for T ELECTRONIC ZOOM SETTING, the sub-command dial can be used to adjust zoom when the monitor is opened horizontally to approximately 180°. N The focus ring can be used to adjust zoom when autofocus is enabled. Removing Lens Caps Remove lens caps as shown. Lenses with Lens Hoods When attached, lens hoods reduce glare and protect the front lens element. Peripherals and Optional Accessories N Lens caps may differ from those shown.
Lenses with Aperture Rings At settings other than A, you can adjust aperture by rotating the lens aperture ring (exposure modes A and M). A 16 11 8 5.6 4 2.8 A 16 11 8 5.6 4 Aperture ring The Aperture Mode Switch If the lens has an aperture mode switch, aperture can be adjusted manually by sliding the switch to Z and rotating the aperture ring. Aperture ring Aperture mode switch Peripherals and Optional Accessories N When the aperture ring is set to A, rotate the sub-command dial to adjust aperture.
Lenses Manual Focus Lenses Slide the focus ring to the front for autofocus. For manual focus, slide the focus ring to the back and rotate it while checking the results in the camera display. The focus distance and depth-of-field indicators can be used to assist manual focus. O Note that manual focus may not be available in all shooting modes.
Lenses Lens Care Use a blower to remove dust, then gently wipe with a soft, dry cloth. Any remaining stains can be removed by wiping gently with a piece of Fujifilm lens-cleaning paper to which a small amount of lens-cleaning fluid has been applied. Replace the front and rear caps when the lens is not in use.
Connections 177
HDMI Output Camera shooting and playback displays can be output to HDMI devices. Connecting to HDMI Devices Connect the camera to TVs or other HDMI devices using a third-party HDMI cable. 1 2 Turn the camera off. Connect the cable as shown below, making sure the connectors are fully inserted. Insert into HDMI connector Insert into HDMI Micro connector (Type D) O Use an HDMI cable no more than 1.5 m (4.9 ft.) long.
HDMI Output Shooting Shoot photos and record movies while viewing the scene through the camera lens on or saving footage to the HDMI device. N This feature can be used to save 4K and Full HD movies to an HDMI recorder. Playback To start playback, press the camera a button. The camera monitor turns off and pictures and movies are output to the HDMI device. Note that the camera volume controls have no effect on sounds played on the TV; use the television volume controls to adjust the volume.
Wireless Transfer Access wireless networks and connect to computers, smartphones, or tablets. For more information, visit: http://fujifilm-dsc.com/wifi/ Smart Phones and Tablets: FUJIFILM Camera Remote Install the latest version of the FUJIFILM Camera Remote app on your smartphone or tablet to connect to the camera via Bluetooth® or Wi-Fi. For downloads and other information, visit: http://app.fujifilm-dsc.
Wireless Transfer Smart Phones and Tablets: Bluetooth® Pairing Use r CONNECTION SETTING > Bluetooth SETTINGS > PAIRING REGISTRATION to pair the camera with smartphones or tablets. Pairing offers a simple method for downloading photos from the camera. N Photos are downloaded via a wireless connection. Smartphones and Tablets: Wi-Fi Use the r WIRELESS COMMUNICATION options in the shooting menu or the playback menu to connect to a smartphone or tablet via Wi-Fi.
Wireless Transfer Computers: FUJIFILM PC AutoSave Install the latest version of FUJIFILM PC AutoSave to your computer to upload pictures from the camera over wireless networks. For downloads and other information, visit: http://app.fujifilm-dsc.com/en/pc_autosave/ Computers: Wireless Connections You can upload pictures from the camera using the s PC AUTO SAVE option in the playback menu. N You can also upload pictures by pressing and holding the Fn button in playback mode.
Connecting to Computers via USB Connect the camera to a computer to download pictures. Windows (MyFinePix Studio) Use MyFinePix Studio to copy pictures to your computer, where they can be stored, viewed, organized, and printed. MyFinePix Studio is available for download from the following website: http://fujifilm-dsc.com/mfs/ Once download is complete, double-click the downloaded file (“MFPS_Setup.EXE”) and follow the on-screen instructions to complete installation.
Connecting the Camera Connect the camera and computer using the supplied USB cable. 1 Find a memory card containing pictures you want to copy to the computer and insert the card into the camera. O Loss of power during transfer could result in loss of data or dam- age to the memory card. Insert a fresh or fully-charged battery before connecting the camera. 2 Turn the camera off and connect the supplied USB cable as shown, making sure the connectors are fully inserted.
Connecting to Computers via USB O If a memory card containing a large number of images is inserted, there may be a delay before the software starts and you may be unable to import or save images. Use a memory card reader to transfer pictures. Connect the camera directly to the computer; do not use a USB hub or keyboard. Do not disconnect the USB cable while data are being exchanged between the camera and computer or insert or remove memory cards while transfer is in progress.
instax SHARE Printers Print pictures from your digital camera to instax SHARE printers. Establishing a Connection Select r CONNECTION SETTING > instax PRINTER CONNECTION SETTING in the camera setup menu and enter the instax SHARE printer name (SSID) and password. The Printer Name (SSID) and Password The printer name (SSID) can be found on the bottom of the printer; the default password is “1111”. If you have already chosen a different password to print from a smartphone, enter that password instead.
instax SHARE Printers Printing Pictures 1 Turn the printer on. 2 Select V instax PRINTER PRINT in the camera playback menu. The camera will connect to the printer. PRINTER PRINT instax-12345678 CONNECTING TO PRINTER FUJIFILM-CAMERA-1234 CANCEL 3 Use the selector to display the picture you want to print, then press MENU/OK. PRINTER PRINT 100-0020 TRANSMIT instax-12345678 CANCEL N Pictures taken with other cameras cannot be printed.
MEMO 188
Technical Notes 189
Accessories from Fujifilm The following optional accessories are available from Fujifilm. For the latest information on the accessories available in your region, check with your local Fujifilm representative or visit http://www.fujifilm.com/products/digital_ cameras/index.html. Rechargeable Li-ion batteries NP-W126S: Additional high-capacity NP-W126S rechargeable batteries can be purchased as required. Battery chargers BC-W126: Replacement battery chargers can be purchased as required.
Accessories from Fujifilm Remote releases RR-90: Use to reduce camera shake or keep the shutter open during a time exposure. Stereo microphones MIC-ST1: An external microphone for movie recording. FUJINON lenses XF-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount. XC-series lenses: Interchangeable lenses for use exclusively with the FUJIFILM X-mount.
Shoe-mounted flash units EF-X500: This clip-on flash unit has a Guide Number of 50/164 (ISO 100, m/ft.) and is powered by four AA batteries or an optional EF-BP1 battery pack. The flash head can be rotated 90° up, 10° down, 135° left, or 180° right for bounce lighting. EF-42: This clip-on flash unit (powered by four AA batteries) has a Guide Number of 42/137 (ISO 100, m/ft.) and supports manual and TTL flash control and auto power zoom in the range 24–105 mm (35 mm format equivalent).
Accessories from Fujifilm Grip belts GB-001: Offers an enhanced grip. Macro extension tubes MCEX-11/16: Attach between the camera and the lens to shoot at high reproduction ratios. Teleconverters XF1.4X TC WR: Increases the focal length of the compatible lenses by about 1.4×. XF2X TC WR: Increases the focal length of the compatible lenses by about 2.0×. Mount adapters FUJIFILM M MOUNT ADAPTER: Allows the camera to be used with a wide selection of M-mount lenses.
Software from Fujifilm The camera can be used with the following Fujifilm software. FUJIFILM Camera Remote Establish a wireless connection between your camera and a smartphone or tablet (P 180). http://app.fujifilm-dsc.com/en/camera_remote/ FUJIFILM PC AutoSave Download pictures from your camera over wireless networks (P 182). http://app.fujifilm-dsc.com/en/pc_autosave/ MyFinePix Studio Manage, view, print, and edit the many images downloaded from your digital camera (P 183). http://fujifilm-dsc.
For Your Safety IMPORTANT SAFETY INSTRUCTIONS Instructions: All the safety and operating instructions • Read Instructions should be read before the appliance is operated. Instructions: The safety and operating instructions • Retain Instructions should be retained for future reference. Warnings: All warnings on the appliance and in the • Heed Warnings operating instructions should be adhered to. Instructions All operating and use instructions • Follow Instructions: should be followed.
Power Lines: An outside antenna system should not be locat- Damage Requiring Service: Unplug this video product from ed in the vicinity of overhead power lines or other electric the wall outlet and refer servicing to qualified service personlight or power circuits, or where it can fall into such power nel under the following conditions: lines or circuits.
For Your Safety WARNING Do not disassemble Do not touch internal parts WARNING Using a flash too close to a person’s eyes may cause visual impairment. Take particular care when photographing infants and young children. Do not remain in prolonged contact with hot surfaces.
CAUTION Do not cover or wrap the camera or the AC power adapter in a cloth or blanket. This can cause heat to build up and distort the casing or cause a fire. Do not use the plug if it is damaged or if it does not fit securely into the outlet. Failure to observe this precaution could result in fire or electric shock. When you are cleaning the camera or you do not plan to use the camera for an extended period, remove the battery and disconnect and unplug the AC power adapter.
For Your Safety AC Power Adapters Use only Fujifilm AC power adapters designated for use with this camera. Other adapters could damage the camera. • The AC power adapter is for indoor use only. • Be sure the DC plug is securely connected to the camera. • Turn the camera off before disconnecting the adapter. Disconnect the adapter by the plug, not the cable. • Do not use with other devices. • Do not disassemble. • Do not expose to high heat and humidity. • Do not subject to strong physical shocks.
NOTICES To prevent fire or shock hazard, do not expose the unit to rain or moisture. Please read the “Safety Notes” and make sure you understand them before using the camera. Perchlorate Material—special handling may apply. See: http://www.dtsc.ca.gov/hazardouswaste/perchlorate For Customers in the U. S. A. Tested To Comply With FCC Standards FOR HOME OR OFFICE USE Contains IC : 7736B-02100005 Contains FCC ID : W2Z-02100005 FCC Statement: This device complies with Part 15 of the FCC Rules.
For Your Safety For Customers in Canada CAN ICES-3 (B)/NMB-3(B) CAUTION: This Class B digital apparatus complies with Canadian ICES-003. Industry Canada statement: This device complies with Industry Canada’s licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference; and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
Technical Notes Wireless Network and Bluetooth Devices: Cautions This product complies with the following EU Directives: • The wireless transmitter operates in the 2.4 GHz band using DSSS, OFDM and GFSK modulation.
For Your Safety Be sure to read these notes before using the lens Safety Notes WARNING • Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s Manual carefully before use. • After reading these safety notes, store them in a safe place.
Product Care To ensure continued enjoyment of the product, observe the following precautions. Camera body: Use a soft, dry cloth to clean the camera body after each use. Do not use alcohol, thinner, or other volatile chemicals, which could discolor or deform the leather on the camera body. Any liquid on the camera should be removed immediately with a soft, dry cloth. Use a blower to remove dust from the monitor, taking care to avoid scratches, and then gently wipe with a soft, dry cloth.
Cleaning the Image Sensor Dust that cannot be removed using the V SENSOR CLEANING option in the setup menu can be removed manually as described below. O Note that there will be a charge to repair or replace the image sensor if it is damaged during cleaning. 1 Use a blower (not a brush) to remove dust from the sensor. O Do not use a brush or blower brush. Failure to observe this precaution could damage the sensor. 2 Check whether the dust has been successfully removed.
Firmware Updates Updates to product firmware may result in changes not described in the manual. For more information, visit: http://www.fujifilm.com/support/digital_cameras/software Checking the Firmware Version O The camera will only display the firmware version if a memory card is inserted. 1 2 Turn the camera off and check that a memory card is inserted. 3 Turn the camera off. Turn the camera on while holding the DISP/BACK button.
Troubleshooting Consult the table below should you encounter problems using your camera. If you don’t find the solution here, contact your local Fujifilm distributor. Power and Battery Problem Solution • The battery is exhausted: Charge the battery or insert a fully-charged spare battery (P 30). The camera does not turn on. • The battery is inserted incorrectly: Reinsert in the correct orientation (P 26).
Problem Solution • There is dirt on the battery terminals: Clean the terminals The charging lamp blinks, but the battery does not charge. with a soft, dry cloth (P 26). • The battery has been charged many times: The battery has reached the end of its charging life. Purchase a new battery. If the battery still fails to charge, contact your Fujifilm dealer (P 190). Menus and Displays Problem Solution Display is not in English. Select ENGLISH for a (P 37, 146).
Troubleshooting Problem The camera does not focus. 209 Technical Notes Solution The subject is not suited to autofocus: Use focus lock or manual focus (P 80). • The subject’s face is obscured by sunglasses, a hat, long hair, or other objects: Remove the obstructions (P 104). • The subject’s face occupies only a small area of the frame: Change the composition so that the subject’s face occupies a larger area of the frame (P 104). No face is detected.
Problem Solution • Shutter speed is slow and the ambient temperature is high: This is normal and does not indicate a malfunction. Pictures are mottled. • The camera has been used continuously at high temperatures or a temperature warning is displayed: Turn the camera off and wait for it to cool down (P 33, 215). Playback Problem Solution The pictures were taken with a different make or model of Pictures are grainy. camera.
Troubleshooting Problem Solution • The camera is not properly connected: Connect the camera properly (P 178). No picture or sound on TV. • Input on the television is set to “TV”: Set input to “HDMI” (P 178). • The volume on the TV is too low: Use the controls on the tele- vision to adjust the volume (P 178). The computer does not Be sure the camera and computer are correctly connected recognize the camera. (P 183).
Troubleshooting Problem Smartphone will not display pictures. Solution Select ON for RESIZE IMAGE FOR SMARTPHONE H. Selecting OFF increases upload times for larger images; in addition, some phones may not display images over a certain size (P 160). Miscellaneous Problem Solution • Temporary camera malfunction: Remove and reinsert the battery (P 26). • The battery is exhausted: Charge the battery or insert a The camera is unresponsive. fully-charged spare battery (P 30).
Warning Messages and Displays The following warnings appear in the display. Warning Description Low battery. Charge the battery or insert a fully-charged i (red) spare battery. Battery exhausted. Charge the battery or insert a fulj (blinks red) ly-charged spare battery. The camera cannot focus. Use focus lock to focus on ans (displayed in red with other subject at the same distance, then recompose the red focus frame) picture.
Warning Description • The memory card is not formatted for use in the camera: Format the card. • The memory card contacts require cleaning or the memory card CARD ERROR PROTECTED CARD BUSY b MEMORY FULL WRITE ERROR FRAME NO. FULL Technical Notes 12 214 is damaged: Clean the contacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Incompatible memory card: Use a compatible card. • Camera malfunction: Contact a Fujifilm dealer.
Warning Messages and Displays Warning Description • The file is corrupt or was not created with the camera: The file cannot be viewed. READ ERROR • The memory card contacts require cleaning: Clean the con- tacts with a soft, dry cloth. If the message is repeated, format the card. If the message persists, replace the card. • Camera malfunction: Contact a Fujifilm dealer. An attempt was made to delete or rotate to a protected picPROTECTED FRAME ture. Remove protection and try again.
Memory Card Capacity The following table shows the recording time or number of pictures available at different image sizes. All figures are approximate; file size varies with the scene recorded, producing wide variations in the number of files that can be stored. The number of exposures or length remaining may not diminish at an even rate.
Specifications System Model Product Number Effective pixels Image sensor Technical Notes FUJIFILM X-T100 FF180001 Approx. 24.2 million 23.5 mm × 15.7 mm (APS-C format), CMOS (complementary metal-oxide semiconductor) image sensor with square pixels and primary color filter Storage media Fujifilm-recommended SD/SDHC/SDXC memory cards Memory card slots SD memory card slot (UHS-1) File system Compliant with Design Rule for Camera File System (DCF), Exif 2.
System Shutter speed Continuous • Mechanical shutter ⁃ Mode P: 4 s to ¼ s ⁃ Other modes: 30 s to ¼ s ⁃ Bulb: Max. 60 min. ⁃ Time: 30 s to ¼ s • Electronic shutter ⁃ Mode P: 4 s to ⁄ s ⁃ Other modes: 30 s to ⁄ s ⁃ Bulb: Fixed at 1 s ⁃ Time: 30 s to ⁄ s • Mechanical+electronic ⁃ Mode P: 4 s to ⁄ s ⁃ Other modes: 30 s to ⁄ s ⁃ Bulb: Max. 60 min. ⁃ Time: 30 s to ⁄ s Mode J O O Focus Frame rate (fps) Frames per burst 6.0 Up to approximately 20 3.
Specifications System Flash mode Hot shoe Sync contact Sync terminal Viewfinder LCD monitor Movies Auto, fill flash, off, slow sync, rear-curtain sync, commander (red-eye removal off ); auto with red-eye removal, fill flash with red-eye removal, off, slow sync with red-eye removal, rear-curtain sync with red-eye removal, commander (red-eye removal on) Accessory shoe with TTL contacts X contact; supports sync speeds as fast as ⁄ s – 0.39-in.
Power supply/other Power supply Camera size (W × H × D) Camera weight NP-W126S rechargeable battery 121.0 mm × 83.0 mm × 47.4 mm (33.4 mm excluding projections, measured at thinnest part)/4.8 in. × 3.3 in. × 1.9 in. (1.3 in.) Approx. 399 g/14.1 oz., excluding battery, accessories, and memory card Shooting weight Approx. 448 g/15.8 oz.
Specifications NP-W126S rechargeable battery Nominal voltage 7.2 V DC Nominal capacity 1,260 mAh Operating 0 °C to +40 °C/+32 °F to +104 °F temperature Dimensions 36.4 mm × 47.1 mm × 15.7 mm/1.4 in. × 1.8 in. × 0.6 in. (W × H × D) Weight Approx. 47 g/1.7 oz. AC-5VG AC power adapter Rated input 100 V – 240 V AC, 50/60 Hz Input capacity 10.5 VA (100 V), 11.9 VA (240 V) Rated output 5.0 V DC, 1000 mA Operating 0 °C to +40 °C/+32 °F to +104 °F temperature Weight Approx. 26 g ± 15%/0.9 oz.
MEMO 222
MEMO 223
7-3, AKASAKA 9-CHOME, MINATO-KU, TOKYO 107-0052, JAPAN http://www.fujifilm.com/products/digital_cameras/index.
