BL00004954-100 FUJINON LENS GF250mmF4 R LM OIS WR OWNER'S MANUAL 日本語 ENGLISH FRANÇAIS DEUTSCH ESPAÑOL NEDERLANDS SVENSKA NORSK SUOMI РУССКИЙ ITALIANO DANSK POLSKI 中文简 中文繁體 한글 ﻋﺮﺑﻲ
For Your Safety Be sure to read these notes before use Safety Notes Thank you for your purchase of this product. For repair, inspection, and internal testing, contact your FUJIFILM dealer. • Make sure that you use the lens correctly. Read these safety notes and the camera Owner’s Manual carefully before use. • After reading these safety notes, store them in a safe place.
WARNING Do not view the sun through the lens or camera viewfinders. Failure to observe this precaution can cause permanent visual impairment. CAUTION Do not use or store in locations that are exposed to steam, or smoke or are very humid or extremely dusty. Failure to observe this precaution can cause fire or electric shock. Do not leave in direct sunlight or in locations subject to very high temperatures, such as in a closed vehicle on a sunny day. Failure to observe this precaution can cause fire.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help. • You are cautioned that any changes or modifications not expressly approved in this manual could void the user’s authority to operate the equipment. Notes on the Grant: To comply with Part 15 of the FCC Rules, this product must be used with a Fujifilm-specified ferrite-core A/V cable, USB cable, and DC supply cord.
Before Using This Product The lens may not perform as expected and some features may not be available with older versions of the camera firmware. Be sure to update the camera firmware to the latest version. Instructions on viewing the camera firmware version and updating camera firmware are available from the following website: http://www.fujifilm.
Parts of the Lens 250 C A 32 22 16 11 8 5.6 4.0 GF250mmF4 R LM OIS WR Q The lens mount includes a rubber ring to ensure that the lens remains dust- and splash-proof. The ring can be replaced for a fee at any FUJIFILM service center.
Supplied Accessories • Front lens cap • Rear lens cap • Lens hood Attaching the Hood • Lens pouch • Tripod collar foot When attached, lens hoods reduce glare and protect the front lens element. Attaching the Lens See the camera manual for information on attaching and removing lenses. Q This lens is for use exclusively with FUJIFILM G mounts and can not be used with X mounts. Removing the Caps Removing the Hood Remove the caps as shown.
The Polarizing Filter The Focus Range Selector To access the polarizing filter, open the filter access port cover. Choose the focus range for autofocus. • FULL: Focus on subjects at any distance. • 5 m–∞: Focus on subjects at distances of 5 m or more. Focus is faster than when FULL is selected. The filter can be rotated by inserting a finger through the access port. Optical Image Stabilization (OIS) To use optical image stabilization, slide the O.I.S. switch to ON.
Removing the Tripod Collar Align the marks on the lock knob and collar (A). Pull the knob (B) and lift the collar (C) as shown. The Focus Control Buttons, Focus Selector, and Focus Preset Button (a) (b) (c) AF-LOCK (Focus Lock) 1 Slide the focus selector (b) to AF-L. 2 Press any of the focus control buttons (a) to lock focus at the current position. Lock knob R Focus can also be locked using camera controls.
PRESET (Focus Preset) A Creating a Focus Preset To save the current focus position in the lens as a focus preset, press the focus preset button (c). R Status is shown in the camera LCD monitor. • Preset saved (green) • Preset recalled (green) • Preset save/load error (blinks red) R The focus distance can be saved with the focus selector (b) in any position. B Recalling the Focus Preset 1 Slide the focus selector (b) to PRESET. 2 Press any focus control button (a) to restore the preset focus position.
Specifications Type Lens construction Focal length (35 mm format equivalent) Angle of view Max. aperture Min. aperture Aperture control Number of blades Stop size Focus range (measured from focal plane) Max. magnification External dimensions: Diameter × Length* (approx.) * distance from camera lens mount flange Weight* (approx.