User's Manual
Table Of Contents
- CHAPTER5 Using Setup Mode
- How to use this chapter
- Entering Setup Mode
- Overview of Setup Mode
- Printing a List of Selected Options
- Deciding Which Options to Change
- Changing MENU1 and MENU2 Options
- Changing Hardware Options
- Changing Print Position Adjustment Options
- Changing Configuration Options
- Exiting and Saving
- Resetting Defaults
- Using the Diagnostic Functions
- Setup Mode Reference
- Online Setup MODE
- CHAPTER6 Maintenaice
- CHAPTER7 Trouble-shooting
- CHAPTER8 Installing options
USING SETUP MODE
User's Manual5-14
CHANGING MENU1 AND
MENU2 OPTIONS
The MENU1 and MENU2 functions allow you to change the print options
assigned to MENU1 and MENU2 on the printer control panel. In normal
(nonsetup) mode, you can easily switch between the menus for printing, as
described in Chapter 4.
MENU1 is invoked when you first turn the printer on.
Select the same emulation on the printer as is selected in your software. If the
emulations are not the same, the printer will not work correctly with your
software. If you plan to use two different emulations on a regular basis, assign
the most frequently used emulation to MENU1. Assign the second emulation
to MENU2. All of the other settings available for MENU1 and MENU2 are
optional. Some of the items and options will vary with the emulation.
To determine which features your software supports, refer to your software
documentation.
Table 5.3 describes the MENU1 and MENU2 items and options. Both
functions offer the same items and options. The items in Table 5.3 are listed
in the order in which they are printed. Not all items are defined for all
emulations and some options vary with the emulation.
The procedure for changing the MENU1 and MENU2 options is described
after Table 5.3.