User's Manual
Table Of Contents
- CHAPTER5 Using Setup Mode
- How to use this chapter
- Entering Setup Mode
- Overview of Setup Mode
- Printing a List of Selected Options
- Deciding Which Options to Change
- Changing MENU1 and MENU2 Options
- Changing Hardware Options
- Changing Print Position Adjustment Options
- Changing Configuration Options
- Exiting and Saving
- Resetting Defaults
- Using the Diagnostic Functions
- Setup Mode Reference
- Online Setup MODE
- CHAPTER6 Maintenaice
- CHAPTER7 Trouble-shooting
- CHAPTER8 Installing options
Setup Mode
USING SETUP MODE
User's Manual 5-49
Quick
Reference
Introduc-
tion
Setting Up
Paper
Handling
Printing
Setup Mode
RESETTING DEFAULTS This section describes how to reset the printer’s power-on defaults, all of the
factory defaults, or the factory defaults only for MENU1 and MENU2.
Resetting Power-On Defaults
Power-on defaults are the settings saved in the printer’s permanent memory.
The defaults are enabled whenever you turn the printer on. The easiest way
to reset the power-on defaults is to turn the printer off and then on again.
This method is useful if you have made changes in setup mode that you do
not want to save.
Resetting Factory Defaults
Factory defaults are those settings preselected at the factory. For a list of the
printer’s factory defaults, see the section Printing a List of Selected
Options earlier in this chapter. To reset the factory defaults for all functions,
proceed as follows:
1. Turn off the printer.
2. While pressing the MENU, TEAR OFF, and ONLINE buttons, turn
on the printer. Continue to press all three buttons until the printer
beeps.
The factory defaults are now reset.
Resetting Factory Defaults in MENU1 and MENU2
This method resets factory defaults for MENU1 and MENU2 options, listed
in Table 5.3, but does not reset the printer hardware, print position adjust-
ment, and configuration options. To reset the factory defaults in MENU1
and MENU2, proceed as follows: