User's Manual

USING SETUP MODE
User's Manual5-6
To select an option from the <item> menu:
1. Repeatedly press the LOAD button or the LF/FF button to position the
red cursor on the plastic print guide under the option you require.
2. Press the MENU button to select the option. The printer prints the
next item and its options. You can press MENU to select the option.
Then, the printer prints the previous item and its options.
3. After selecting the desired options, press the ONLINE button to
reprint the <<FUNCTION>> menu.
For each item, the short-underlined option is the current default option
(the option currently saved in the printer’s permanent memory). In the
previous example, the default options are Fujitsu DPL24C PLUS
emulation, Courier 10 font, and letter print quality.
The chart on the next page summarizes how to select options such as
emulation, font, and print quality and how to use functions that do not
have options.
Setup Mode Example
To become familiar with setup mode, try the following example. This
example shows how to change the font and pitch in MENU2 to Prestige Elite
12 and 12 cpi.
1. Load continuous forms paper.
2. Enter setup mode.
Press the TEAR OFF and ONLINE buttons simultaneously until the
printer beeps.
3. Select the MENU2 function.
Wait for the printer to stop printing and press the LOAD button or the
LF/FF button twice to position the red cursor on the print guide under
MENU2. Press the TEAR OFF button or the MENU button to select
the MENU2 function and print the <EMULATE> item and its options.