User's Manual
Table Of Contents
- CHAPTER5 Using Setup Mode
- How to use this chapter
- Entering Setup Mode
- Overview of Setup Mode
- Printing a List of Selected Options
- Deciding Which Options to Change
- Changing MENU1 and MENU2 Options
- Changing Hardware Options
- Changing Print Position Adjustment Options
- Changing Configuration Options
- Exiting and Saving
- Resetting Defaults
- Using the Diagnostic Functions
- Setup Mode Reference
- Online Setup MODE
- CHAPTER6 Maintenaice
- CHAPTER7 Trouble-shooting
- CHAPTER8 Installing options
TROUBLE-SHOOTING
7-8 User's Manual
Error name Blink Light
ONLINE AREA OVER PAPER OUT
Paper end *
Eject jam error * *
Continuous form/
cut sheet switch * *
lever error
Load jam error *
*1 If the setup item PPR-OUT:IGNORE is specified, paper end is not
detected.
LED status
LEDs light up depending on the following error types.
Table 7.3 Operating Problems and Solutions (Cont.)
Load jam error After the tractor PE sensor - Execute the loading
detected the form at operation.
continuous form loading, - Press the online button
the TOF sensor does not to turn the printer
detect the top of the form online.
even after line feed is - When the cut sheets
executed a certain number are loaded, remove the
of times. sheets once, and
After the set sensor detects then insert them again.
the sheet at cut sheet They are then loaded
loading, the TOF sensor automatically.
does not detect he top of
the sheet even after line
feed is executed a certain
number of times.
Error name Error description Recovery method