Digital KVM Switch User Guide

11
590-673-501A
3 Analog Operation
3.1 Controlling Your System
The BX600 Digital KVM Switch uses the intuitive menus of the OSCAR interface to
allow you to select server modules and configure your system.
3.2 Viewing and Selecting Slots and Server
Modules
Use the Main dialog box to view, configure, and control server modules connected to the
BX600 Digital KVM Switch. You can view your server modules by name or by slot, but
by default, you will see a Name list when you first launch OSCAR.
To access the Main dialog box:
Press Print Screen to launch OSCAR. The Main dialog box appears.
-or-
If a password has been assigned, the Password dialog box appears. Type your
password and click OK.
The Main dialog box appears. For more information, see “Setting Console Security”
on page 18.
Figure 8: Example of Configured Main Dialog Box
NOTE:
To launch OSCAR, you can also press the Ctrl key twice within one second. You can use this key sequence
in any place you see Print Screen throughout this User's Guide.
OSCAR indicates the status of server modules in your system in the far right column of
the Main dialog box. Table 1 describes the status symbols.