Digital KVM Switch User Guide

Analog Operation Controlling the Status Flag
17
590-673-501A
-or-
Select Slot to display server modules numerically by slot number.
 Click OK.
To set a screen delay time for OSCAR:
 Type in the number of seconds (Ø-9) you want to delay display of OSCAR after you
press Print Screen
. Entering Ø will instantly launch OSCAR with no delay.
 Click OK.
Setting a time to delay display of OSCAR allows you to complete a soft switch without
OSCAR displaying. To perform a soft switch, see “Soft Switching” on page 12.
3.4.3 Controlling the Status Flag
The status flag displays on your desktop and shows the name of the selected Server
Module or the status of a slot. Use the Flag dialog box to configure the flag to display by
Server Module name, or to change the flag color, opacity, display time, and location on
the desktop.
To access the Flag dialog box:
 Press Print Screen
. The Main dialog box will appear.
 Click Setup and then click Flag. The Flag dialog box appears.
Figure 13: Flag Dialog Box
Flag Description
Flag type by name.
Flag indicating that the user has been
disconnected from all systems.
Table 3: OSCAR Status Flags