Digital KVM Switch User Guide

Setting Console Security Analog Operation
18
590-673-501A
To determine how the status flag is displayed:
 Select Displayed to show the flag all the time or select Displayed and Timed to
display the flag for only five seconds after switching.
NOTE: If only Timed is selected the flag will not be displayed at all.
 Select a flag color in Display Color. The flag numbers represent Flag 1, black; Flag
2, red, Flag 3, blue; and 4, purple.
 In Display mode, select Opaque for a solid color flag or select Transparent to see
the desktop through the flag.
 To position the status flag on the desktop:
a. Click Set Position to gain access to the Position Flag screen.
b. Left-click on the title bar and drag to the desired location.
c. Right-click to return to the Flag dialog box.
Figure 14: Position Flag
NOTE: Changes made to the flag position are not saved until you click OK in the Flag dialog box.
 Click OK to save settings.
-or-
Click X to exit without saving changes.
3.4.4 Setting Console Security
OSCAR enables you to set security on your BX600 Digital KVM Switch console. You
can establish a screen saver mode that engages after your console remains unused for
a specified delay time. Once engaged, your console will remain locked until you press
any key or move the mouse. You will then need to type in your password to continue.
Use the Security dialog box to lock your console with password protection, set or
change your password, and enable the screen saver.
To access the Security dialog box:
 Press Print Screen
. The Main dialog box will appear.
 Click Setup and then click Security. The Security dialog box appears.
NOTE: If a password has been previously set, the user will have to enter the password before being able to access
the Security dialog box.