Digital KVM Switch User Guide

Analog Operation Setting Console Security
19
590-673-501A
Figure 15: Security Dialog Box
To set or change the password:
CAUTION: There is no master password. The BX600 appliance must be sent to Fujitsu Siemens in the case of a
lost password.
 Single-click and press Enter or double-click in the New text box.
 Type the new password in the New text box and press Enter
. Passwords require 5
to 12 characters and must include at least one letter and one number. Passwords
are also case sensitive. Legal characters are: A-Z, a-z, and 0-9.
NOTE: You can leave the New text box and the Repeat text box empty, if you do not want a password. (See “To
remove password protection from your console:” on page 20.)
 In the Repeat box, type the password again and press Enter.
 Click OK if you only want to change your password, and then close the dialog box.
To password protect your console:
 Set your password as described in the previous procedure.
 Select Enable Screen Saver.
 Type the number of minutes for Inactivity Time (from 1 to 99) to delay activation of
password protection and the screen saver feature.
 For Mode, select Energy if your monitor is ENERGY STAR™ compliant; otherwise
select Screen.
CAUTION: Monitor damage can result from the use of Energy mode with monitors not compliant with ENERGY
STAR™.
 (Optional) Click Test to activate the screen saver test which lasts 10 seconds then
returns you to the Security dialog box.
 Click OK.
To log in to your console:
 Press Print Screen
to launch OSCAR. The Password dialog box appears.
 Type your password and then click OK.
 The Main dialog box appears if the password was entered properly.