Operation Manual

Color monitor 17F1
14 - English A26361-K818-Z100-1-5E19
Making the picture shorter or longe
r
Making the picture norrower or wide
r
Making picture corrections
Pincushion distortion is when the sides of the screen display are bent inward or outward.
Unsymmetrical pin balance is when the sides of the screen displays are bent inward or outward on
one side.
Trapezoid distortion is when the top or bottom of the screen display is too wide or too narrow.
Parallelogram distortion means that the sides of the picture bend to the left or right. Tilt distortion
must be set when the screen display is not axially symmetrical. Corner distortion is when the corner
edges of the screen display are bent inward or outward.
Pincushion distortion: Bending the right and left
side inward or outward
Non-symmetrical pincushion distortion: Setting
the sides so that they are symmetrical
Trapezoid distortion: Making the bottom edge
narrower and the top edge wider or making th
e
top edge narrower and the bottom edge wide
r
Parallelogram distortion: Reducing the angle of
the left and right sides
Picture rotation: Rotating the picture in a
clockwise or counter-clockwise direction
Top corner distortion: Correct distortion of top
corners
Bottom corner distortion: Correct distortion of
bottom corners
Setting advanced options
VIDEO LEVEL
DDC
Setting the video signal
If required, the entry level of the video signal
can be changed from 0.7 V (default) to 1 V. If
the monitor is operated on a PC, use the
default setting.
Activate or deactivate DDC function
LANGUAGE Setting language for the OSD menu