Operation Manual

Color monitor 17F1
18 - English A26361-K818-Z100-1-5E19
Preset operating modes
i
The picture position and size have been set to optimum values at the factory for the
operating modes listed above. Depending on the screen controller used, it may be
necessary to adjust the display position and size. In this case, you can change and save
the settings (see "Changing the monitor settings using the OSD menu").
Horizontal frequency Refresh rate Screen resolution
31.47 kHz ±0,5 kHz
31.47 kHz
±0,5 kHz
37.50 kHz
±0,5 kHz
43.27 kHz
±0,5 kHz
46.88 kHz
±0,5 kHz
53.68 kHz
±0,5 kHz
60.02 kHz
±0,5 kHz
63.98 kHz
±0,5 kHz
68.68 kHz
±0,5 kHz
70 Hz
± 2Hz
60 Hz
± 2Hz
75 Hz
± 2Hz
85 Hz
± 2Hz
75 Hz
± 2Hz
85 Hz
± 2Hz
75 Hz
± 2Hz
60 Hz
± 2Hz
85 Hz
± 2Hz
720 x 400
640 x 480
640 x 480
640 x 480
800 x 600
800 x 600
1024 x 768
1280 x 1024
1024 x 768
For ergonomic reasons we recommend a refresh rate of at least 75 Hz and a maximum resolution of
1024 x 768 pixels.
Pin assignment D-SUB
1
5
6
10
11
15
Pin Meaning Pin Meaning
1 Video input red 9 not assigned
2 Video input green 10 Logic ground
3 Video input blue 11 not assigned
4 not assigned 12 DDC data (SDA)
5 DDC Return 13 H. sync
6 Red video ground 14 V. sync
7 Green video ground 15 DDC Clock
8 Blue video ground (SCL)