Operation Manual

Color monitor 17F1
A26361-K818-Z100-1-5E19 English - 19
Tilting and turning area
5°
15°
45°
45°
The specified tilting area refers to the zero position of the monitor foot marked with an arrow.
Error handling
Should an error occur, first check the following points. If the distortion is still not eliminated, the
monitor should, if possible, be checked on another computer.
If you are unable to solve the problem, please inform our Help Desk.
The display is too small or not centred
The monitor recognises an undefined mode.
Ê Adjust the picture size, position and edges (see "Operation of the monitor").
Colour displacements
Ê Degauss the monitor (see "Operation of the monitor").
Ê Ensure that there are no devices or objects near the monitor which generate magnetic fields
(e. g. loudspeakers, plug-in power supply units).
Flickering picture
Ê Set an ergonomic refresh rate (≥ 75 Hz) using the computer software (see documentation for
your computer or your graphics card).
Ê Ensure that the monitor is kept at a distance of at least 30 cm from other monitors of the same
construction type. With different monitors, the distance must be increased, if necessary.
No display (power indicator does not light)
Ê Check whether the monitor is switched on.
Ê Check whether the power cable on the monitor is connected correctly.
Ê Check whether the computer is switched on.