Computer Monitor User Manual

Getting s tarted
Adjusting the height
The height of the monitor can be adjusted by approximately 120 mm.
► Gra sp the monitor with both hands on the right and left edge of the ca sing
and move it upward or downward .
Adjusting the inclination
► H old the monitor with both hand
s on the left and right sides o f the casing
and move it to the desired angle
.
Adjusting the rotation
The monitor c an be horizontally rotated by ± 45° from its centre position.
► Gra sp the monitor with both hands on the right and left edge of the ca sing
and turn it to the desired position.
Adjusting portrait format
The monitor can be rotated from horizontal format (landscape mode) into
vertical format (portrait m ode).
► Gra sp the monitor with both hands on the right and left edge of the casing, move it into
the highest position and turn it clockwise until it is in the p ortrait position.
For you to be able to display the screen contents in portrait mode, your graphics card
will also need to support this function or you will need to use special software.
In the OSD menu you have the option of switching the OSD manually
from landscape mode to portrait mode (see "
Changing the mo nitor
settings using the OSD menu", Page 17).
To reset the monitor to landscape mode, the monitor should be turned anti-clockwise.
The O SD display can be reset again in the OSD menu.
10 A26361-K1317-Z220-1-7619, edition 2