Computer Monitor User Manual
Table Of Contents
- B17-5 ECO/B19-5 ECO
- Contents
- Your LCD screen...
- Important notes
- Getting started
- Operation
- Troubleshooting
- Notes regarding the DIN EN ISO 13406-2 standard
- Technical specification
Getting started
Removing monitor base
Before you can use a swivel arm or a wall bracket, you must remove the monitor base.
The disp lay surface is susceptible to scratching!
► Switch off the monitor and pull the power
plug out of the power socket.
► Lay the monitor on its face on a soft surface.
► Remo ve all cables.
► To remove the monitor base, undo the
screws on the m on itor base.
You can now mount a swivel arm or a wall
bracket in accordance with VESA FPMPMI
using a hole spacing of 100 mm.
For instructions on h o w to mount th e
swivel arm or wall bracket, please
see the documentation for the swivel
arm or wall bracket.
For instructions on how to mount the swive l arm or wall bracket, please see
the documentation for the swivel arm or wall bracket.
A26361-K1317-Z220-1-7619, edition 2 11