Computer Monitor User Manual

Operation
Activate/deactivate ECO operating mode
The power consumption of the device can be decreased by reducing
the brightness of the picture.
► Press the Forwards / ECO button to switch the ECO opera ting mode on or off.

The m e ssage ECO on / off is displayed.
If the ECO operating mode is activated, the following OSD settings are changed:
Colour
temperature
6500K
Brightness
reduced
After the ECO operating mode is switched off, the brightness previously set by the user is restored.
Locking the O SD menu
The OSD menu can be locked to prevent accidental or unauth orised changes to the monitor settings.
► Press and keep the
SELECT/ME
NU
button pressed for a fe w seconds while y ou
switch on the mon itor with the ON/OFF switch.

The message OSD locked / unlo
cked is displayed.
Proceed in the s ame way to r
elease the locked O SD menu again.
Locking the ON/OFF button
The ON/OFF sw itch can be locked to prevent accidental or unauthorised
changes to the monitor settings.
► Press the Forwards / ECO bu tton and the Back /
INPUT
button at the same
time and keep them pressed for a few seconds.

The message Power button l
ocked / unlocked is displayed.
Proceed in the same way to
release the locked ON/OFF switch again.
Changing the monitor settings using the OSD m enu
With the buttons on the control panel, you can c all up and use the integrated
OSD (On-Screen Display) menu.
A26361-K1317-Z220-1-7619, edition 2 17