User's Manual

- Since at least one segment is required, it is not possible to delete all segments.
- When a segment is deleted, the connected NIC is also deleted. Since at least one NIC is also required, it is not possible to delete all
NICs.
- Reduction is not possible while a server is operating.
Edit a Virtual Server
By clicking a virtual server, the virtual server can be edited by selecting the tabs displayed.
Details tab
The virtual server type can be selected using the Details tab.
An example of the Details tab display is shown below.
Part Description
Host name Sets the virtual server name specified in the L-Platform template.
"usage + (no. of servers + 1)" is set automatically for the virtual server that has been added
as an option.
To rename, the name must be no more than 85 characters long and not include the
following characters:
<, >, &, ', " and control characters
However, the strings and the number of characters that can be specified may vary
depending on the system settings. It is recommended that the name be specified using no
more than 15 of the following characters. The value specified for this item cannot consist
of only numbers. Hyphens cannot be used for the first character.
Alphanumeric characters, underscores ("_") and hyphens ("-")
A pre-existing name cannot be specified.
Type From the drop-down menu, select the type (specifications) of the registered server.
The CPU, memory size, and System Disk will be set according to the type of the server
selected.
However, a message may appear indicating that the server type cannot be changed with
some types of virtualization software.
- 65 -