User Manual
Table Of Contents
- Revision History
- Table of Contents
- Target products
- 1 INTRODUCTION
- 2 OVERVIEW OF SIMPLE AV SYSTEM BOARD
- 3 PREPARATIONS
- 4 PROGRAM EXECUTION METHOD
- 5 SUPPORTED MEDIA
- 6 OPERATION METHOD
- 7 SPECIFICATIONS
- 7.1 Hardware
- 7.2 Software
- 7.2.1 Software Block Diagram
- 7.2.2 Software Library
- 7.2.3 System Specifications
- 7.2.4 API Specifications
- 7.2.5 Operation Limit
- 7.2.6 Operation Flow of Entire Application
- 7.2.7 Application State Transition
- 7.2.8 Operation Flow
- 7.2.8.1 Main Processing Function
- 7.2.8.2 USB Task Processing Function
- 7.2.8.3 File System (MDF) Task Processing Function
- 7.2.8.4 HMI Task Processing Function
- 7.2.8.5 AUDIO Play Task Processing Function
- 7.2.8.6 Switch Press Detection Processing Function
- 7.2.8.7 Processing Function After Switch Press Detection
- 7.2.8.8 Touch Panel Touch Detection Processing Function
- 7.2.8.9 Processing After Touch Panel Touch Detection Function
- 7.2.9 File Configuration
AN706-00040-2v0-E
23
(3) Play Start Operation
While music is not yet played, the selected music can be played by the following
operation.
① Press down the Play/Stop switch.
Play/Stop Switch
Figure 18 Play Start Operation by Play/Stop Switch
② Touch the thumbnail on the touch panel (LCD) (MP3).
(picture1.jpg to picture5.jpg corresponds to music1.mp3 to music5.mp3)
Touch the touch operation area image with your finger.
Select your favorite music!
Touch Operation Area
Figure 19 Play Start Operation by Touch Panel
The touched image is enlarged and the music linked with the image starts playing.
(Example) If the touched image were picture3.jpg, music3.mp3 would be selected.