FUJITSU SEMICONDUCTOR CONTROLLER MANUAL CM41-00412-1E F2MC FAMILY 10BASE-T LAN ADAPTER MB2142-02 USER’S MANUAL
PREFACE ■ Objectives and intended readership The MB2142-02 support tool (10BASE-T LAN adapter) is designed to enable the development and evaluation of products based on the F2MC* family. The MB2142-02 is connected to the main unit (MB2141). This enables the main unit to perform LAN-based communication with the host machine (such as a personal computer or workstation). This manual describes the handling and connection of the MB2142-02.
1. The products described in this manual and the specifications thereof may be changed without prior notice. To obtain up-to-date information and/or specifications, contact your Fujitsu sales representative or Fujitsu authorized dealer. 2. Fujitsu will not be liable for infringement of copyright, industrial property right, or other rights of a third party caused by the use of information or drawings described in this manual. 3.
READING THIS MANUAL ■ Page layout In this manual, an entire section is presented on a single page or spread whenever possible. The reader can thus view a section without having to flip pages. The contents of each section are summarized immediately below the title. You can obtain a rough overview of the 10BASE-T LAN adapter (MB2142-02) by reading through these summaries. The spread layout of this manual is described below.
CONTENTS CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT .................................................1 1.1 Packing List ........................................................................................................................................2 1.2 10BASE-T LAN Adapter Specifications.............................................................................................. 4 1.3 IF Cable Specifications .........................................................................
FIGURES Figure 1.1 10BASE-T LAN adapter ............................................................................................................... 2 Figure 1.3 IF cable dimensions ..................................................................................................................... 7 Figure 2.1 System configuration ................................................................................................................. 10 Figure 2.2 Connection to main unit ................
CHAPTER 1 HANDLING AND SPECIFICATIONS OF THE PRODUCT This chapter explains the handling and specifications of the 10BASE-T LAN adapter. Read this chapter and check the contents of the package before attempting to use the 10BASE-T LAN adapter. 1.1 Packing List 1.2 10BASE-T LAN Adapter Specifications 1.3 IF Cable Specifications 1.
1.1 Packing List Before first using the 10BASE-T LAN adapter, check that the package contains the following components: • 10BASE-T LAN adapter × 1 • IF cable × 1 ■ Appearance and names of parts Figure 1.1 illustrates the 10BASE-T LAN adapter. For details of the necessary connections, see Chapter 2, “Connections.” LAN connector LAN LAN ADAPTOR 10BASE-T COM PORT IF connector Figure 1.
The function of each part is described below: IF connector: Used to connet the IF cable. 10BASE-T LAN connector: Used to connect the twisted pair LAN cable.
1.2 10BASE-T LAN Adapter Specifications Table 1.2a lists the 10BASE-T LAN adapter specifications. Table 1.2b lists the LAN specifications. ■ 10BASE-T LAN adapter specifications Table 1.2a lists the 10BASE-T LAN adapter specifications. Table 1.
■ LAN specifications Table 1.2b lists the LAN specifications. An RJ45 type LAN connector (8-conductor modular connector, 10BASE-T-compatible) is used. Table 1.
1.3 IF Cable Specifications Table 1.3a lists the IF cable components, Table 1.3b lists the general specifications of the IF cable, and Figure 1.3 shows the dimensions of the IF cable. ■ IF cable specifications For an explanation of connecting the adapter to the main unit, see Section 2.2, “Connection to Main Unit.” Table 1.3a IF cable components Part name Remarks FCN-237R068-G/E connector ×2 Fujitsu FCN-230C068-C/E cover ×2 Fujitsu Table 1.
Figure 1.
1.4 Notes on Use When using the 10BASE-T LAN adapter, keep the following points in mind: ■ Operating considerations When using the 10BASE-T LAN adapter, always keep the following points in mind: ❍ Turn off the power before connecting or removing a cable. ❍ When removing a connector, do not pull the cable itself; grasp and pull the connector. ❍ To prevent electrostatic damage, be careful not to touch the connector pins, and do not allow the pins to come into contract with any objects.
CHAPTER 2 CONNECTIONS This chapter describes how to connect, turn on, and turn off the 10BASE-T LAN adapter. Familiarize yourself with the contents of this chapter before attempting to turn on the adapter. 2.1 System Configuration 2.2 Connection to Main Unit 2.3 Connection to Network 2.4 Power-on Sequence 2.
2.1 System Configuration Connecting the 10BASE-T LAN adapter to a network that includes a host machine enables LAN-based communication with the host machine. ■ System configuration Connecting the 10BASE-T LAN adapter to a network that includes a host machine enables LANbased communication with the host machine. Figure 2.1 shows the hardware system configuration when the 10BASE-T LAN adapter is used.
Memo 11
2.2 Connection to Main Unit As shown in Figure 2.2, use an IF cable to connect the 10BASE-T LAN adapter to the main unit (sold separately). ■ Connection to main unit As shown in Figure 2.2, use an IF cable to connect the 10BASE-T LAN adapter to the main unit (sold separately). 10BASE-T LAN adaptor LAN LAN ADAPTOR 10BASE-T COM PORT IF cable RESET TRIG EMUL POWER RS232C × ACIN COMPORT F9210000I 01A Main unit Figure 2.
■ Notes When connecting the 10BASE-T LAN adapter to the main unit (sold separately), keep the following points in mind: ❍ Turn off the power before connecting or removing a cable. While the power is turned on, connecting or removing a cable may cause a malfunction. ❍ To remove a cable, do not pull the cable itself; grasp and pull the connector. Pulling the cable itself may cause a conductor inside the cable to break.
2.3 Connection to Network As shown in Figure 2.3, connect the LAN conector to the network that includes the host machine. ■ Connection to network According to Figure 2.3, connect the LAN conector to the network that includes the host machine. Use a commercially available twisted pair LAN cable and hub; these parts are not supplied with the 10BASE-T LAN adapter.
■ Notes When connecting the LAN connector to the network that includes the host machine, keep the following points in mind: ❍ Turn off the power before connecting or removing a cable. While the power is turned on, connecting or removing a cable may cause a malfunction. ❍ To remove a cable, do not pull the cable itself; grasp and pull the connector. Pulling the cable itself may cause a conductor inside the cable to break.
2.4 Power-on Sequence Before turning on the power, ensure that all connections are complete. Then, turn on the power in the order of the host machine, the main unit, then the target (user system). ■ Power-on sequence Before turning on the power, ensure that all connections are complete. Then, turn on the power in the order of the host machine, the main unit, then the target (user system). To turn on the power, set the power switch on the rear panel of the main unit to “1.
2.5 Power-off Sequence Turn off the power in the order of the target (user system), the main unit, then the host machine. ■ Power-off sequence Turn off the power in the order of the target (user system), the main unit, then the host machine. To turn off the power, set the power switch on the rear panel of the main unit to “0.” Turning off the main unit also turns off the 10BASE-T LAN adapter.
