Datasheet

Dual-Core Intel® Xeon® Processor 5000 Series Datasheet 29
Electrical Specifications
Notes:
1. The V
CC_MIN
and V
CC_MAX
loadlines represent static and transient limits. Please see Section 2.12.1 for V
CC
overshoot specifications.
2. This table is intended to aid in reading discrete points on Figure 2-4.
3. The loadlines specify voltage limits at the die measured at the VCC_DIE_SENSE and VSS_DIE_SENSE lands
and at the VCC_DIE_SENSE2 and VSS_DIE_SENSE2 lands. Voltage regulation feedback for voltage
regulator circuits must also be taken from processor VCC_DIE_SENSE and VSS_DIE_SENSE lands and
VCC_DIE_SENSE2 and VSS_DIE_SENSE2 lands. Please refer to the appropriate platform design guide for
details on VR implementation.
4. Non-shading denotes the expected I
CC
range applies to both Dual-Core Intel Xeon Processor 5000 series
(1066 MHz & 667 MHz) and Dual-Core Intel Xeon Processor 5063 (MV). Shading denotes the expected I
CC
range applies to Dual-Core Intel Xeon Processor 5000 series (1066 MHz) only. [120 A - 150 A]
Notes:
1. The V
CC_MIN
and V
CC_MAX
loadlines represent static and transient limits. Please see Section 2.12.1 for VCC
overshoot specifications.
2. Refer to Table 2-10 for processor VID information.
80 VID - 0.100 VID - 0.115 VID - 0.130
85 VID - 0.106 VID - 0.121 VID - 0.136
90 VID - 0.113 VID - 0.128 VID - 0.143
95 VID - 0.119 VID - 0.134 VID - 0.149
100 VID - 0.125 VID - 0.140 VID - 0.155
105 VID - 0.131 VID - 0.146 VID - 0.161
110 VID - 0.138 VID - 0.153 VID - 0.168
115 VID - 0.144 VID - 0.159 VID - 0.174
120 VID - 0.150 VID - 0.165 VID - 0.180
125 VID - 0.156 VID - 0.171 VID - 0.186
130 VID - 0.163 VID - 0.178 VID - 0.193
135 VID - 0.169 VID - 0.184 VID - 0.199
140 VID - 0.175 VID - 0.190 VID - 0.205
145 VID - 0.181 VID - 0.196 VID - 0.211
150 VID - 0.188 VID - 0.203 VID - 0.218
Table 2-11. V
CC
Static and Transient Tolerance (Sheet 2 of 2)
I
CC
(A) V
CC_Max
(V) V
CC_Typ
(V) V
CC_Min
(V) Notes
Figure 2-4. V
CC
Static and Transient Tolerance Load Lines
VID - 0.000
VID - 0.020
VID - 0.040
VID - 0.060
VID - 0.080
VID - 0.100
VID - 0.120
VID - 0.140
VID - 0.160
VID - 0.180
VID - 0.200
VID - 0.220
VID - 0.240
VID - 0.260
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Icc [A]
Vcc [V]
Vcc
Maximum
Vcc
Minimum
Vcc
Typical
VID - 0.000
VID - 0.020
VID - 0.040
VID - 0.060
VID - 0.080
VID - 0.100
VID - 0.120
VID - 0.140
VID - 0.160
VID - 0.180
VID - 0.200
VID - 0.220
VID - 0.240
VID - 0.260
0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
Icc [A]
Vcc [V]
Vcc
Maximum
Vcc
Minimum
Vcc
Typical