Datasheet

System configurator and order-information guide
PRIMERGY RX100 S7p Status 2012-04-30
Configuration diagram PRIMERGY RX100 S7p
with 2.5" Hard disk drives
System unit ( I )
Modul 1 Intel CPU
Dual- or or
Quad-core
Modul 3
1. PSU 2. PSU
Redundant PSU option
Modul 2 Power supply
Modul 4 Processor ( II )
Bay for 3,5"x 0,5" CSS or Front VGA
5.25"x0.5" Empty / ODD
Memory ( III )
Accessible drives ( VI )
Hard disk drives ( VII )
Extension slots
SCSI Controller ( VIII ) 2.5"x1" ch-1 2.5"x1" ch-1
Disk array ( IX )
Fibre Channel (X)
2.5"x1" ch-1 2.5"x1" ch-1
Communication/Network ( XI )
System Management ( XII )
- 2.5" HDD hot plug bay
Miscellaneous ( XIII )
Slot3: PCIe G3 x16
Low Profile 175mm
Slot2: PCIe G2 x4 (x1 wired)
Low Profile, 170 mm
Slot1: PCIe G2 x8 (x4 wired)
for modular RAID only, no external connector
Key:
Included in basic unit
Option
One CPU ( first CPU ) and one memory ( first memory ) has to be selected for an orderable basic unit.
Standard Power Supply
1
PCIe-Bus
2
1
Bank 1
Bank 2
noged noged noged
Fujitsu Technology Solutions x86 PRIMERGY Server 4 of 18