User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q5010
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Use the touch screen
- Tablet buttons
- Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card (configuration dependent)
- Wireless LAN€/ Bluetooth€/ LTE radio components (configuration dependent)
- Ethernet and LAN (optional, only with cradle, keyboard dock or adapter cable)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows€10
- Technical data
- Manufacturer’s notes
- Index
First-time setup of your device
Switching on the device for the first time
Switchingonforthefirst time
When you switch on the device for the first time, the supplied s oftware is
installed and configured. Because this procedure m ust not be interrupted,
you should set aside enough time for it to be fully completed and connect
the device to the mains using th e mains adapter.
During the installation process, DO NOT restart the d evice unless
you are requested to do so!
To make it easier to use yo
ur device for the first time, the operating system
is pre-installed on the
hard disk.
2
1
► Press the ON/OF F button (1) for about one second to switch the device on.
The power-on indicator (2) lights up as long as the system is switched on.
► During installation, follow th e instructions on screen.
If a W indows opera ting system is installed on your device, you will find more information
on the system and drivers, help programmes, update s, manuals etc. on the device. This
information can also be found on the Internet at "
http://www.fujitsu.com/fts/ suppor t/".
You can find information and help on the Windows operating system functions
on the Internet at "
http://windows .microsoft.com" .
18 Fujitsu