User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q5010
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Use the touch screen
- Tablet buttons
- Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card (configuration dependent)
- Wireless LAN€/ Bluetooth€/ LTE radio components (configuration dependent)
- Ethernet and LAN (optional, only with cradle, keyboard dock or adapter cable)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows€10
- Technical data
- Manufacturer’s notes
- Index
Working with the Tablet PC
Wireless LAN / Bluetooth / LTE radio components
(configuration dependent)
The installation of radio components not approved by Fujitsu will invalidate
the certifications issued for this device.
Switching the wireless components on and off
wireless compo nents are switched on and off via the corresponding functions of the operating system.
► To switch wireless components on and off individually, select Settings – Chang e
PC settings – Network – Airplane mode.
Setting up WLAN access
• Requirement: A WLAN must be available and you m u st have the
corresponding access information.
Information on configuring the WLAN access can be found in the
documentation for your operating system.
Access via LTE (con figuration dependent)
If you ordered an integrated LTE module with your system, you can enjoy optimum
reception and maximum energy efficiency without awkward cables or antennas. An
installed LTE module is ready for immediate use.
If you did not order an LTE module, you can purchase the accessories for LTE reception
from your retailer or your F ujitsu Technology Solutions dealer.
For information about connecting with the LTE network, please see the documentation
for the hardware that you will be using.
You can connect your device to the internet via LTE. To do this, use one
of the following connection types:
• Integrated LTE module (the type depends on your model variant)
• a USB dongle (a USB stick with your mobile phone provider ’s SIM card)
• a mobile end-device (e.g. mobile phone w ith Bluetooth or cable connection)
36 Fujitsu