User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q5010
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Use the touch screen
- Tablet buttons
- Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card (configuration dependent)
- Wireless LAN€/ Bluetooth€/ LTE radio components (configuration dependent)
- Ethernet and LAN (optional, only with cradle, keyboard dock or adapter cable)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows€10
- Technical data
- Manufacturer’s notes
- Index
Accessories for your Tablet PC (opti
onal)
Connecting the Tablet PC to the cradle
It is possible to connect the Tablet PC to the cradle while it is operating.
Unplug the mains adapter from the Tablet PC before you connect
the Tablet PC to the cradle.
If the tablet PC is connected to the cradle, you must connect the mains adapter
to the cradle in order to be able to use all of the cradle’s functions.
cradle
► Remove the power plug of the mains adapter from the mains so cket.
► Pull the mains adapter cable out of the DC jack (DC IN) of the Tablet PC.
1
2
3
4
► Position the Tablet PC so that it lies on the surface of the tray on the cradle.
► Push the tablet PC onto the cradle i n the direction of th e arrow (1) u ntil you feel it engage
in the connector and until the release bu tton has returned to its original position.
► Plug the DC output connector on the mains adapter into the DC input
connector (DC IN) on the cradle (2).
► Connect the power cable to the pow er adapter provided for the cradle (3),
see chapter "
Technical data", Page 76.
► Plug the power cable into the mains socket (4).
Fujitsu 41