User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q5010
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Use the touch screen
- Tablet buttons
- Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card (configuration dependent)
- Wireless LAN€/ Bluetooth€/ LTE radio components (configuration dependent)
- Ethernet and LAN (optional, only with cradle, keyboard dock or adapter cable)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows€10
- Technical data
- Manufacturer’s notes
- Index
Troubleshooting and tips
The cursor does not correctly follow the
pen movements
Cause
Fault elimination
Pen incorrectly calibrated
► Calibrate the pen as described in chapters
"
Setting the pen", Page 27 and "Calibrating
the pen", Page 27.
The Tablet PC does not start after switch on
TheTabletPC
Cause Troubleshooting
The batte ry is dead.
► Charg e the battery.
or
► Connect the mains adapter to the Tablet
PC.
The power adapter is not connected correctly.
► Check whether the mains adapter is
connected correctly to the Tablet PC.
► Switch on the Tabl
et PC.
The Tablet PC stops working
TheTabletPCEnergysaving
mode
Cause Troubleshooting
The Tablet PC is in energy sa ving mode.
► Leave energy saving mode.
An application programme has caused the
malfunction.
► Close the application program or restart
the Tablet PC (by restarting the operating
system or switching the device off and back
on again).
The batte ry is dead.
► Charg e the battery.
or
► Connect the mains adapter to the Tablet
PC.
Fujitsu 71