User manual
Table Of Contents
- FUJITSU Tablet STYLISTIC Q5010
- Contents
- Innovative technology
- Ports and controls
- Important notes
- First-time setup of your device
- Working with the Tablet PC
- Status indicators
- Switching on the Tablet PC
- Switching the Tablet PC off
- Handwriting recognition
- Touch screen
- Select display orientation (portrait or landscape orientation)
- Use the touch screen
- Tablet buttons
- Camera
- Rechargeable battery
- Using the power-management features
- Memory cards
- SIM card (configuration dependent)
- Wireless LAN€/ Bluetooth€/ LTE radio components (configuration dependent)
- Ethernet and LAN (optional, only with cradle, keyboard dock or adapter cable)
- GPS
- Accessories for your Tablet PC (optional)
- Security functions
- Connecting external devices
- Settings in BIOS Setup Utility
- Starting the BIOS Setup Utility
- Operating the BIOS Setup Utility
- Exiting BIOS Setup Utility
- Exit Saving Changes - save changes and exit BIOS Setup Utility
- Exit Discarding Changes – Discard changes and exit BIOS Setup Utility
- Load Setup Defaults – Copy Standard Entries
- Discard Changes – Discard changes without exiting the BIOS Setup Utility
- Save Changes - save changes without exiting the BIOS Setup Utility
- Save Changes and Power Off
- Troubleshooting and tips
- Executing a reset
- Help if problems occur
- The Tablet PC's date or time is incorrect
- Battery charging indicator not lit
- The Tablet PC's touchscreen remains dark
- The display on the Tablet PC's touchscreen is difficult to read.
- The external monitor remains blank
- The external monitor is blank or the image is unstable
- The cursor does not correctly follow the pen movements
- The Tablet PC does not start after switch on
- The Tablet PC stops working
- The printer does not print
- The wireless connection to a network does not work
- The battery discharges too quickly
- Acoustic warnings
- Error messages on the screen
- Restoring the system under Windows€10
- Technical data
- Manufacturer’s notes
- Index
Troubleshooting and tips
Error message/cause Resolution
CMOS ba ttery bad
If the error message occurs repeatedly, the
buffer battery in the Tablet PC is flat.
► Contact your sales outlet or our
customer
service centre.
System CMOS checksum bad - default configuration
used
The system configuration inform ation is
incorrect.
► Switch off the Tablet PC.
► Switch on the Tablet PC.
► In the BIOS Setup, select t
he Exit menu.
► Select the entry Load Setup Defaults.
► Select OK and p ress the En
ter key.
Extended memory failed
at offset: xxxx Failing Bits:
zzzz zzzz
When testing th e exten
ded memory an error has
resulted at the addre
ss xxxx.
► Contact your sales outlet or our cust omer
service centre.
Keyboard controll
er error
► Switch off your Tablet PC using the ON/OFF
button.
► Wait 3 - 5 seconds and switch on the Tablet
PC again.
Keyboard error
If you are using an external keyboard:
► Check the connection and reboot the Tablet
PC.
nn Stuck key
► Make sure that no key is pressed.
Operating system not found
► Check in the Boot menu in BIOS Setup,to
ensure that the corre ct boot sequence is set.
► Make sure th
at the operating system is
installed o
n the corresponding drive.
Press <F 1> to resume , <F2> to SETUP
This error message appears if an error occurs
during the self-test before starting the operating
system.
► Press th e v o lume down button to start BIOS
Setup.
or
► If you ar
e working with a keyboard, press
the
F1
or
F2
ke
y on the keyboard.
Real ti
me clock e rror
► Contact your sales outlet or our cust omer
service centre.
nnnnK Shadow RAM failed at offse t: xxxx Failing
Bits: zzzz
► Contact your sales outlet or our cust omer
service centre.
System battery is dead - Replace and run SETUP
► Cont
act your sales outlet or our customer
serv
ice centre.
Sys
tem cache error - Cache disabled
► Contact your sales outlet or our cust omer
service centre.
Sys
tem time r error
► Contact your sales outlet or our cust omer
service centre.
74 Fujitsu