Installation Instructions


Push the dishwasher into position, taking care not to twist or crush the power
cord or hoses (see fi g. 5-17).
TWO PEOPLE WEARING SAFETY GLOVES ARE NEEDED TO PUSH
THE DISHWASHER INTO PLACE.

Fig. 5-15
Fig. 5-16
Fig. 5-17
Mount the door panel.
Place the template on the inner surface of the panel, centering it along the up-
per side and matching up the reference locators (ref. A fi g. 5-18); mark the po-
sition of the door hooks with a pencil (see fi g. 5-18). Remove the template and
use a drill with a suitable bit to make holes at the points marked on the panel.

A
A

Use the screwdriver to secure the door hooks with the 8 supplied screws (see
fi g. 5-19) at the marked reference points.

Fig. 5-18
Fig. 5-19
EN
25
INSTALLATION INSTRUCTION
5.3.2 Procedure for mounting the door panel
(only F6DW24FI1 model)