Installation Instructions

EN
21
Side and central profiles mounting:
Appliance
Wall or furniture
E
D
A
B
A
B
D
6,5 (¼”) 6,5 (¼”)
20 (¾”) 20 (¾”)
22 (7⁄8”) 22 (7⁄8”)
22 (7⁄8”) 22 (7⁄8”)
6,5 (¼”)6,5 (¼”)
18 (¾”)
44,4 (1 ¾”)
18 (¾”)
C
13 (½”)
A - Profile connection trim (screws for fixing to cabinetry not
included)
B - Profile trim cover
C - plastic connecting brackets
D - Connecting element
E - Aluminum frameI
NOTE
In all cases, if installing into an opening that is wider than
the width specified in this manual, the side profile trims
/ frames can be removed, shimmed and reattached to
effectively widen the appliance to match the width of the
opening allowing for a perfect looking installation without
gaps. Take this into account when making integrated
panels for a wider opening to ensure your desired gap /
reveal around the panels.
6.3 Maximum cabinet depth over “Integrated”
refrigerator with single door panel
It is possible that the design of the kitchen and, in particular,
of the niche where the “Integrated” refrigerator is going to
be fitted includes a cabinet right above the refrigerator itself
that must be closed with the same panel mounted on the
Integrated refrigerator door.”
In this case, the total depth of the cabinet without the door
(above the refrigerator) must not exceed the total depth of the
refrigerator itself [ 1 ].
This will allow the panel attached to the refrigerator door
to open correctly without interference during its rotation up
to 105°.
585 (23”)
650 (25 ⅝”)
47 (1 ⅞”) + front panel thickness
1