Installation Instructions

• Purge air from the water lines by running the ‘Manual

Clean’ function from the Menu->Functions->Water Filter

options. You may need to complete this sequence several

times until you stop hearing air sputtering from the ice

maker ﬁll tube (Refer to your Use & Care Manual).

• Once you are satisﬁed that the system is purged of air

switch the Ice Maker on by touching the

button which

will illuminate.

NOTE

If the Fresh Zone drawer is conﬁgured as a Fridge or a

Fresh compartment the ice maker will be disabled. Default

mode for the Fresh Zone drawer is Freezer.

• For further information about the appliance operation,

refer to the User Manual.

NOTE

If at the ﬁrst start - up the message Stand by does not

appear, but other messages appear, such as Fridge too

warm, Freezer too warm, or sound signals are activated,

it means that the appliance has already started the

cooling process. If this is the case, deactivate any possible

acoustic signals by pressing the Alarm button, close the

door and wait until the set temperature is reached.

IMPORTANT

It is necessary to let the unit reach the correct temperature

before foods are stored inside.