Datasheet

funkwerk UTM 2100
Attacks and threats have become increasingly
diverse over recent years. The times when
firewalls and virus scanners were sufficient to
build security solutions are now history. Thanks
to Funkwerk UTM, however, comprehensive
protection at the gateway does not need to be
complex or involve numerous different systems.
The new Funkwerk UTM technology is able to identify the various attacks and threats and specifically
blocks them without impairing communication. Funkwerk UTM combines centralized remote
administration with fine-tuned security components to boost security. It is easy to use and thereby
dramatically reduces investment and running costs.
Specifications UTM 2100 100/150/200 User
Appliance Platform
UTM 2100 UTM 2100 UTM 2100
Model
1 U
Users 100 150 200
Processor 2,8 GHz
RAM 512 MB
Hard Disk 40 GB
Interfaces 10/100 Mbit/s 6
Firewall
Feature Description
Stateful Firewall Stateful Firewall or Stateful Inspection Firewall is an advanced security feature. The data
connection is not only checked on packet filter level (source IP address, destination IP
address and port) but also checks on the state of a connection to allow or to block a
connection.
NAT
Network Address Translation is used to hide private IP addresses in the internal LAN
behind the external official Internet IP address of the Funkwerk UTM gateway. In addition
Funkwerk UTM can handle Basic NAT (also known as Static NAT) in which an internal IP
can be substituted 1:1 with an external IP.
PAT Port Address Translation is used to redirect TCP and UDP ports. Example: an external
request is coming to a mail server on port 25. At the UTM gateway it can be redirected e.g.
to the internal port 225.
Full Application Level Gateway Beyond the checks of the connection state (Stateful Firewall) the Funkwerk UTM firewall
has even more advanced protocol and integrity checks. The integrated application level
gateway checks if the communication protocols are correctly spoken or if somebody tries
to compromise a system using forbidden protocols. Application level checks are done on
the following protocols: DNS, FTP, HTTP, SMTP, POP3
funkwerk UTM 2100

Summary of content (4 pages)