Safety Instructions

28
MAINTENANCE & CARE
General cleaning will help prolong the life and performance of your treadmill. Keep the unit
clean and maintained by dusting the components on a regular basis. Clean both sides of
the running belt to prevent dust from accumulating underneath the belt. Keep your running
shoes clean so that dirt from your shoes does not we ar out the running board and belt.
Clean the surface of the running belt with a clean damp clot h.
¾ To better maintain the treadmill and prolo
ng its life it is suggested that the machine be
powered off for 10 minutes every 2 hours and fully powered off whenever not in use.
¾ A loose Running Belt will result in the runner slidin g off when ru nning, while too tight of a
Running Belt will result in decrease to the motors performance and also create more
friction between the ro ller and running belts. The most suitable tightness for the belts is
pulled out 50-7 5mm fro m the Running Board.
CENTERING THE RUNNING BELT:
When the tre
admill is moving, check if the Running Belt drifts.
1. If the Running Belt moves to the right,
turn the adjusting bolt on th e right side ¼
turn clockwise, then turn the left ad justm ent
bolt ¼ turn counter-clockwise. If the belt
does not move, repeat this step until it
centers. Refer to figure A.
2. If the Running Belt moves t o the left, turn
the adjusting bolts on the left side ¼ of a t urn
clockwise, then turn the right adjustment bolt
¼ turn counter-clockwise. If the belt does not
move, repeat this step until it cen ters. Refer
to figure B.
3. Over time the Running Belt will loosen.
To tighten the belt tu rn the Left & Right side
adjustment bo lts one full turn clockwise,
check the tension of the belt. Continue this
process until belt is at the correct tension.
Make sure to adjust both sides equally to
ensure correct belt alignm ent. Refer to
figure C.