Submittal Sheet

Product function Short circuit protection Yes
Design of the short-circuit trip magnetic
Design of the fuse link for IT network for short-circuit
protection of the main circuit
● at 240 V
none required
● at 400 V
gL/gG 50 A
● at 500 V
gL/gG 40 A
● at 690 V
gL/gG 40 A
Installation/ mounting/ dimensions
Mounting position any
Mounting type screw and snap-on mounting onto 35 mm standard mounting rail
according to DIN EN 60715
Height 90mm
Width 45mm
Depth 81mm
Connections/Terminals
Product function
● removable terminal for auxiliary and control
circuit
No
Type of electrical connection
● for main current circuit
screw-type terminals
Arrangement of electrical connectors for main current
circuit
Top and bottom
Type of connectable conductor cross-sections
● for main contacts
— single or multi-stranded
2x (0,5 ... 1,5 mm²), 2x (0,75 ... 2,5 mm²), 2x (1 ... 4 mm²)
— finely stranded with core end processing
2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)
Type of connectable conductor cross-sections
● for auxiliary contacts
— single or multi-stranded
2x (0,5 ... 1,5 mm²), 2x (0,75 ... 2,5 mm²)
Tightening torque
● for main contacts with screw-type terminals
0.8...1.2N·m
● for auxiliary contacts with screw-type terminals
0.8...1.2N·m
Size of the screwdriver tip Pozidriv 2
Design of the thread of the connection screw
● for main contacts
M3
Safety related data
B10 value
● with high demand rate acc. to SN 31920
5000
Proportion of dangerous failures
● with low demand rate acc. to SN 31920
50%
● with high demand rate acc. to SN 31920
50%
3RV1011-1GA10 Subject to change without notice
Page 4/
7
11/28/2017 © Copyright Siemens