Assembly Instructions ASSEMBLY RATING Tools Required For Assembly: The Assembly Rating is a 5-point system that shows the degree of effort needed in assembling a specific product (with 1 being Allen Wrench (Included) 0) easy and 5 being difficult). For some products, two persons are recommended.
ASSEMBLY & CARE ADVICE FOR YOUR FURNITURE TO LAST, CORRECT ASSEMBLY AND PROPER MAINTENANCE ARE NECESSARY, PLEASE FOLLOW THE INFORMATION PROVIDED BELOW TO FULLY ENJOY YOUR FURNITURE BASIC ASSEMBLY TECHNIQUES When lock or spring washer is used in Position each past correctly and insert Use cardboard or carpet area when an assembly, please make sure the screws or bolts into their respective assembling furniture to prevent lock or spring washer is placed holes by hand tighten or using the scratches .
Before you begin, please read Page 2 of "Assembly and Care Advice". And remember, do not tighten until each step is completed or instructed.
Align and attach the from stretcher (#4) 10 the gaps of the front legs #C x PCs #D x PCs #E x PCs Make sure holes of front stretcher (#4) is facing where the arrow is pointing, Prepare 4 bolts assembly by inserting lock washer (JE), then flat washer (¥D} onto bolts Insert front legs to the holes of the scat cushion Secure with bolts Insert wood dowel (#G) to the middle hole of the scat cushion Page 4 of 5
1) Prepare 2 bolts assembly by inserting lock washer 12) Prepare 4 bolts assembly by inserting lock then flat washer (#5) onto bolts (HC). Align washer then flat washer (#E) onto bolts holes of the scat cushion (#2) to the holes of the chair || Source comer holes of the scat cushion (#2) with back Secure middle holes with bolts but do || bolts but de rot fully lighten. not fully tighten.