ASSEMBLY INSTRUCTIONS VERSION # 21-02-02 TOOLS REQUIRED Wrench (included) Allen Wrench {Included) People Recommended ET 00:0 EASY mee DIFFICULT The Assembly Rating is a S-paint system showing the feel of effort needed fo assemble a specific product.
CHECK BEFORE STARTING Are you missing anything? Double-check all parts, hardware and accessories sifted on Page 6 are accounted for. Should we send any replacements? Are there any irregularities or flaws in the pairs? We can send replacements! Check out our Quick Tips! We recommendation reviewing the per-assembly handouts, Even experts need a refresher now and then! Prep Time! Please review the assembly instructions and all diagrams prior to a piling.
PRE ASSEMBLY INTRODUCTION We understand building ready-to-brasserie furniture can be a challenging experience for some. To help avoid confusion, we have provided some helpful dips that may speed up the process. Teamwork ALWAYS have at least two people to help with transporting and assembling the product to avoid potential injury and/or damage.
ASSEMBLY AND CARE ADVICE A FAILURE TO FOLLOW THE GUIDELINES BELOW MAY RESULT IN INJURY AND/OR PROPERTY DAMAGE. \ Turn clockwise to tighten and only tighten when step is completed or when instructed to do so. Position each part correctly and insert screws or bolts into their respective holes Use the appropriate hand tools or power tools for assembly. Select steps, such as tightening screws and for bolts, may require hand tools to avoid causing damage during assembly.
SOFA TABLE » Please keep instructions foe future reference. « Shook the quantity am irregularity of parch End hardware before you sia. wl Ean #1 1pc #2) pc #3) 1pc Bh.
1 Part&) pct Part PCs Hardware@) Apexes 2 Part x1pc Part #9 apexes Hardware@8) *apes Hardware{t) PCs Smaller end of the threaded lots (4B) secure into upper gs ASSEMBLY INSTRUCTIONS Align and attach the smaller end of the threaded bolts (#A} to the top frame then align and attach upper legs (#4) to the larger end of the threaded bolts “Attention to keep the bottom side face up. & Welding Slag 5 1 Please fully tighten the frame (#2) with & nut (#E) by use wrench then secure the misdid leg (#5) by hand.
ASSEMBLY INSTRUCTIONS rn { 3 Smaller end of threaded bolts | (#A) go into middies frame Part @ PCs | Hardware@®) apexes Attention to keep the _ bottom side face up.
ASSEMBLY INSTRUCTIONS 5 Hardware@®) apexes “Please make sure all bolts are fully tightened before attach plugs Sr Part @ xiii Part@ «ip Attach rubber mats (#H) onto middle Part@ x1pc frame tabs, then attach suckers (#G) onto Hardware PCs top frame hole before putting on glasses #78 Hardware) apexes #78)
ASSEMBLY INSTRUCTIONS Wall Mounting and Fixing == EXPANSION WALL ANCHOR Our provided expansion wall anchors are only suitable for masonry walls, such as drywall, plaster or concrete, and are best for holding lightweight items or for anti-tip prevention. if you are unsure of the correct wall anchor to use with the product, please request professional guidance. liability for product damage or failure due io using the incorrect anchors will fall on the installer. QUICK TIPS ‘1.